Hi,
I'm converting a Sherline lathe to CNC and want to have spindle speed control. I had this working when using a Gecko G540 pins 7,8,9.
I am now using 2 seperate Gecko drivers with a CNC4PC...
Type: Posts; User: Cmguitar
Hi,
I'm converting a Sherline lathe to CNC and want to have spindle speed control. I had this working when using a Gecko G540 pins 7,8,9.
I am now using 2 seperate Gecko drivers with a CNC4PC...
Thanks.
I am looking for the pin outs on the 9 pin connector. I want to run another controller software from the computer to the controller board.
Hi,
I want to try controlling my DeskCNC IMSRV 3 axis with a controller other than DeskCNC.
If anyone knows the pinouts to the 2nd gen controller from the PC, I'd appreciate it. Thanks!
Thank you all for your input. I'm just getting back to this project after making some space in the shop to use it again.. I'll be testing it out soon - probably the next week or so. I also want to...
I am trying to get data for specific Globe motors, and would like to know if anyone has information on them. These are the part numbers I am interested in:
403A464
537A484
There was a page...
In a perfect world - yes.
I know too many builders who have spent more time and money dealing with shoddy work from subs, and conclude that it's best done in house. And most of us small guys...
I've found a loose connection in the hardware that could be the culprit
http://www.cnczone.com/forums/attachment.php?attachmentid=367620&stc=1
and I also found a bad crimp in one of the 4 pin...
It's been an adventure in non reliability. I bought a used Sherline Mill with servo motors and DeskCNC with a Generation 2 controller. I am planning to use the machine for doing small pearl inlay...
Figured it out :)
I am trying to get my Sherline Mill with IMS servos to work. I was able to post G Code and load the program.
On the machine window the X,Y, and Z buttons are grayed out and I can't jog the...
Hi- I'm a luthier in Salem, Massachusetts, USA. I just purchased a used Sherline mill with IMServe servos and controller, and will be using it for all kinds of small parts. Any help to setup...