Search:

Just calm down. I mean posts (contributions) and not postprocessors. I don't own this site, but if someone is just complaining, I just can't stop myself from voicing my point of view.

So many posts from you in the forum and so many exclamation marks. Every post in the forum is just complaining about something.

All necessary information can be found in the GPP help. The SolidCAM...

This is no valid fanuc G-Code.

Normaly after a charakter there must be a number.

Crying at the highest level

MDI Mode
Input:

#522=#0

I am dissapointed by you. So hours and hours of tutorials for FREE is not enough? Maybe someone should drive by and hold your hand, too? Also for free? There are so many people in this world which...

Or 5101 RTR ?

What do you mean saying "with or without attribute”?

It rotates the coordinate system round the X-axis and not round Y or Z. So the letter with “1” declares the rotation axis.

X0 Y0 Z0
I1 J0 K0

I believe you confused him more than you helped. :)

@kabelman
I’m not well versed in the 10T but the machine manufacture can usually help in such cases.
You’ll also find literature or tips and...

You’ll get help for free at the service number of Star
07082-7920-30

What do you so many clause numbers for?

No, certainly not. Have you ever tried to drive into a garage with 200 things and to stop 50cm ahead of the wall from 200 at 0?
It’s similar for the machine. It also has to stop first, in that case...

Keyword: inertia!

You should pay attention to readout stop with #504x parameters. Otherwise it can lead to false position values that will be input during a process. It’s valid for the #502x parameters too. If it’s...

Why don’t you do it as follows:

G81 X0.0 Y0.0 Z-3.0 R1.0
X100.0 Y0.0
X100.0 Y100.0
X0.0 Y100.0
G80

The result is the same as with a subprogram. But you’ll enter the same position for each...