Hello everyone. I've been wanting to hook up an old xbox360 controller to my CNC. I am aware that this is possible in mach3/4, but is it possible to use an xbox controller on another controller?
Type: Posts; User: sjefke1993
Hello everyone. I've been wanting to hook up an old xbox360 controller to my CNC. I am aware that this is possible in mach3/4, but is it possible to use an xbox controller on another controller?
First cuts! used the router to mill some holes for workplace clamping.
https://imgur.com/njDIlam
However now i have another problem, i'm using an Arduino Uno with GRBL (no breakout board) and...
Update! I'm steadily progressing toward imminent failure or success, let's see what it will be. Today i finished fabricating the parts, namely gluing up the torsion box that will act as my base....
Pictures update! Started breaking down large pieces of wood into smaller pieces of wood.
https://i.imgur.com/wc14Sdr.jpg?1
https://i.imgur.com/Ai3pzNk.jpg?1
Thanks for the tips!
I was already in the progress of doing some FEM, with the following results:
https://i.imgur.com/kRjD84g.png
https://i.imgur.com/2jGj1PS.png
A load of 300N was...
Peteeng, thanks for the tip about the belt, hadn't thought of that and after checking the belt it would seem my idea wouldn't work, so i changed it to a larger diameter pulley (60mm).
I made some...
Hey boys and girls, after intensively lurking on this forum for a bit i hereby create my first post and start of my project log! A CNC router made from plywood!
My own design, based around a...