Hi Joe, were you able to fix the problem? I am having the same problem getting a one per tool error, do you know wich relays do you need to change?
Type: Posts; User: JFYM88
Hi Joe, were you able to fix the problem? I am having the same problem getting a one per tool error, do you know wich relays do you need to change?
where you able to find the problem? I am having the same problem
best regards,
I disconnected my machine for about for 2 months and I just connected and when I powered it up, it do not start running the vickens software, it just show a square on the middle of the screen. does...
I have not fix it yet, I sent an email to kollmorgen, and they told me I can adjust it from the driver, just like you are telling me. I found the driver's manual and it says how to adjust the...
Looks like the Limit switch was stuck, the machine is now properly working.
thank you very much for your time and help!! I do appreciate it.
I am currently having a problem, hope you can help me with this. Normally when I align the machine, it aligned to the limit switch X=+0.0000 Y=+0.0000 Z=+27.0492 A=0.0000 B=0.0000. something happened...
Hi!!
I am new with cnc machines, I recently bought a cincinnati arrow 1000. Normally when I align the machine, it aligned to the limit switch X=+0.0000 Y=+0.0000 Z=+27.0492 A=0.0000 B=0.0000....
Thanks for your replay!!
based on what you told, I looked in to the control maintenance manual and I found a servo adjustments section. here are some pictures of it.
286180286182
is this what I...
I have a kollmorgen BDS4 driver connected to a 5th axis on a Cincinnati arrow 1000, at first a thought that the servomotor had some kind of failure because it was making a noise, I took it out and...
286154
286156
thank you very much for your help slowlearner and meckardt55!! I thought something was wrong with it, because when I went to check the machine before buying it, the operator started it and I don't...
Yes!! I am new with Cnc machines. I have done the alignment as the operator manual says, and it looses the alignment when I shut it down.
Do you know what is happening?
I just bought a cincinnati arrow 1000, I am having some trouble, it needs axes alignment everytime I power the machine, Does anyone know how to fix this problem? any help is appreciated.
thanks,...