584,808 active members*
5,211 visitors online*
Register for free
Login

Search:

Type: Posts; User: cbyrd

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    874

    Re: PP din socket for tool setter

    This is the schematic for the 1100m
    https://www.cnczone.com/forums/attachment.php?attachmentid=442032&stc=1
    https://www.cnczone.com/forums/attachment.php?attachmentid=442034&stc=1
  2. Re: Anyone tried to modify .ini file for higher than 60 IPM

    If you are running v2.4.2 or later you can issue the command ADMIN RAPIDS SHOW and it will display the current settings, ADMIN RAPIDS SET xxx to set the new speed. I am pretty sure you can select...
  3. Re: Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

    I have one of the original tool racks that had acrylic shelves. It works wonderfully.

    https://www.cnczone.com/forums/attachment.php?attachmentid=428688&stc=1
  4. Replies
    7
    Views
    2,274

    Re: For sale some tormach bits and pieces.

    I will take the 3jaw chuck w backing plate, int and ext jaws and key ($350) $150.

    Chris Byrd
  5. Re: Path Pilot v2.0 Network (Samba) Share Not Accessible

    I would check your SMB settings in Windows 10. If you go to the control panel > Program and Features. Select the turn windows features on and off...
  6. Replies
    6
    Views
    997

    Re: Post for Fusion 360/PathPilot G54/G55/G56

    Here is a post that works correctly. It was fixed on 5/26/2017 - Fixed G59.x output for Tormach PathPilot post.

    https://cam.autodesk.com/posts/download.php?name=tormach

    Version 41497. It was...
  7. Replies
    4
    Views
    1,397

    Re: Latest Fusion 360 Torch.cps post issues?

    There is an updated post available. It was in the forum yesterday and they are going to post it on the post site soon.

    It should be near the top of the forum

    Chris
    ...
  8. Replies
    2
    Views
    1,165

    Re: PathPilot 5 Axis Support/Capabilties

    I had a conversation with one of the software guys a while back about 5th axis support. They said that Pathpilot aka tormach does not support 5th axis and no support on the horizon, since they do...
  9. Replies
    14
    Views
    3,570

    Re: TOOL RACK FROM SANTA CRUZ ELECTRONICS

    I got the CNC Cookbook Special, It was $269 per side and free shipping. I think $299.00 is the normal price. I am not sure if they are running the special still.

    I added the monoprice Video...
  10. Replies
    14
    Views
    3,570

    Re: TOOL RACK FROM SANTA CRUZ ELECTRONICS

    I have not had them make any noise while running my machine. You can always put some weather strip on the back of the strip also to make it quieter.

    That is just have my boxes. I have 4 more on...
  11. Replies
    14
    Views
    3,570

    Re: TOOL RACK FROM SANTA CRUZ ELECTRONICS

    I don't think they have it on the website. I would just call Paul or John.
  12. Replies
    14
    Views
    3,570

    Re: TOOL RACK FROM SANTA CRUZ ELECTRONICS

    I have both the tool rack and the monitor rack. They save lots of room.
    I added a monitor arm so I can move it to see the screen when doing setups.
    They also make wrench, hammer and vise handle...
  13. Thread: G59 P?????

    by cbyrd
    Replies
    15
    Views
    2,602

    Re: G59 P?????

    As SCZ stated, the G59.3 is the limit of Pathpilot. I am not sure of the Linuxcnc limit, but it makes sense.

    I always leave one of my setups (G55) as my offset for my ETS.
  14. Thread: G59 P?????

    by cbyrd
    Replies
    15
    Views
    2,602

    Re: G59 P?????

    Here is the code I use in the fusion post to get the correct work offsets.

    You can search for G59 and look to match the code.


    // wcs
    if (insertToolCall && properties.forceWorkOffset) { //...
  15. Replies
    10
    Views
    2,814

    Re: Enclosure - Keeping the coolant in

    I filled the curved area at the bottom of the sliding door with silicon and formed it so the coolant would run back into the machine. I get a little drip from time to time but not bad.

    If the...
  16. Thread: Way oil question

    by cbyrd
    Replies
    4
    Views
    1,081

    Re: Way oil question

    I just went to the local tractor store and got mine.. I think any iso68 will be fine.
  17. Replies
    17
    Views
    1,515

    Re: How do you cleanup your Tormach mill after job?

    I use a shop vac with a dust deputy to pick up aluminum to recycle and also for plastic and wood to dispose of.

    The Dust Deputy
  18. Replies
    8
    Views
    1,189

    Re: Spring pass on threads with coversational

    To do metric you will have to use G21 to switch to metric. This causes everything to go metric. Pita. I just convert to inch and run.

    There is no spring pass in the conversational as I know...
  19. Re: Tormach Full Enclosure w/original Control Panel

    I have a full enclosure and left the control panel in the machine. I used the remote relocation kit and mounted it on the outside so I still have a stop and green start button on the outside. I...
  20. Replies
    12
    Views
    1,718

    Re: tool offset - pathpilot vs cam

    Whatever is loaded in the tool table in cam is going to determine the tool path. You may break bits if they are really different.

    The tool table in path pilot is only going to use the tool...
  21. Replies
    13
    Views
    3,448

    Re: New Toy - Tormach Smart Cool System

    From what I saw, It will allow a mix of flood and air blast. I think if you can use the fog buster and mount some other air solenoid to do a air blast. You can program the air blast at given...
  22. Replies
    13
    Views
    3,448

    Re: New Toy - Tormach Smart Cool System

    I have been using it since the open house. It really works well. I am ready for the Mutli Cool to come out so you can do a air burst with it..
  23. Replies
    30
    Views
    3,281

    Re: Drill / 5C Collet Holding

    I do not believe so. The top of my ways do not have any oil on them when I run mine. I spray my ways and ball screws with E-900 Ball Screw Lub made by Nook. John W at Tormach said that the...
  24. Replies
    30
    Views
    3,281

    Re: Drill / 5C Collet Holding

    When I was drilling 1018 for threaded inserts, I could drill about 25 5/8" - 3" deep holes before I would touch up my drill bit on the drill doctor.
    I mounted 2 drills in a gang setup. I had the...
  25. Replies
    30
    Views
    3,281

    Re: Drill / 5C Collet Holding

    You might try .0035 or .004 feed per rev or even use a solid carbide drill. Sometimes they drill faster. I know if I go above the 500rpm the bits seem to dull very quickly, even using coolant.
  26. Replies
    30
    Views
    3,281

    Re: Drill / 5C Collet Holding

    I went back to my fusion cam setup for drilling. All the parts had a pre-drilled hole of 7/16. I then opened the hole to 5/8. I was running 500rpm at .003 fpr. I was using chip breaking with .05...
  27. Replies
    30
    Views
    3,281

    Re: Drill / 5C Collet Holding

    I have drilled some 12l14 and was only running 300-500rpm. I also drilled a 1/4" hole first and then drilled my 5/8". Was at a feed rate of .002 per rev and did not have any problems with slip. I...
  28. Replies
    5
    Views
    1,037

    Re: Diamond drag engraving

    When I engrave NFA items to meet the ATF requirements I use the carbide engraver because I can not get a deep enough cut with the drag engraver. I have tried multi pass on stainless and the best I...
  29. Replies
    3
    Views
    783

    Re: Question on 1100 axis motor temps

    I know my z axis is hot to the touch. I was installing something though the back cabinet and was standing on the table. I used the z motor for balance and it was quite hot. Even when machine is...
  30. Replies
    7
    Views
    710

    Re: no probe selection on my setup screen

    If it is not triggering the Accessory Light it maybe the probe is not compatible with the PCNC 440. I would ask Wildhorse to see if they tested it with the 440.

    When I use the passive probe on...
Results 1 to 30 of 111
Page 1 of 4 1 2 3 4