Search:

Hi Chris, i noticed that the post is calling for ipm which iim not sureis right or not, should i change it to ipr and try it?

ok so i found where the encoders ppu was under set up, it looks right to me at 2000 in the ppu, heres a pic of what im seeing...https://www.cnczone.com/forums/attachment.php?attachmentid=479716&stc=1

HI there I know this is a really old post, but i have a similar mill with the rigid tap option that used to work fine and now its doing the same thing, i was hoping you could tell me which parameter...

Hi thanks for the reply, i checked the spindle encoder tonight under the diag screen and i could see it count up and down smooth by rotating it by hand, does that number get stored into a parameter...

Hi thanks for the reply, im using a 1/4-20 tap in this instance so the feed output on line N11 should be F.05 right (1/20)? Im not sure which parameter the spindle encoder number gets pushed into but...

Hi Guys, I have a 1999 vm 16 with a centurion 6 processor with the rigid tap option... Recently my machine quit rigid tapping, it used to rigid tap fine from my fusion 360 cam posts but now it rapids...

Scratch that, the mill will not rigid tap in conversational either... that was a misunderstanding of the selections in conversational on my part....

here is what im seeing when the spindle stops and just sits in the "r" point....479649

here is what im seeing on the control when the spindle freezes at the "R" point

479647

HI guys, I have a 99' milltronics vm 16 with the rigid tap option. I have always used autodesks fusion 360 for my cad/cam software and it used to create posts that rigid tapped on this machine just...