Finally I bought 2 Thomas 2660CE32 pump from ebay seller.
The spec are : 4.6 cfm, 27 in.Hg
The second one will turn on for more porous material machining
Type: Posts; User: mels33
Finally I bought 2 Thomas 2660CE32 pump from ebay seller.
The spec are : 4.6 cfm, 27 in.Hg
The second one will turn on for more porous material machining
Hello !
I have a big interest for All Star Adhesives cover sheet gasket (ref : Cover Sheets Products - All Star Adhesives - gasketing products for CNC routers and v-groove tape for v-grooving and...
Hello to all !
I have a small MDF vacuum plenum of 14" x 21".
Actually, I have a small GAST 1.1 CFM, 25" Hg but and with leaks here and there, I cant get more than 5-6" Hg of vaccum
I try to...
UPDATE #2 : After many search on the web, all my readings point to the same point : electrical noise problem.
I try the debounce in Mach3 but nothing change.
I found a "noise filtering" feature...
UPDATE : I have found something strange. All of my test were done with a 20' cable between my BOB and the switch.
Tonight, I try to connect my switch directly to my BOB and everything work fine !...
I have just finish my CRP4848 assembly and I'm now wiring my home switch.
Before I go will the "real thing", I do a simple test directly on my BOB
Here's my setup :
Mach3
USB Smoothstepper...
In my limited CNC/milling knowledge, a end mill is mostly for steel/aluminium and I never think that I can use this kind of tooling for wood application...
You have open my eyes on this one !...
Hello CNCZONE !
I have a project who need precise cut in 3/4" material.
I mainly use 1/4" spiral bit for my project but for this one 1/4" is too big and I have to pass the job on a scrollsaw to...
You're really funny !
Montreal is mainly a french town !
It's true that you can have service in english in many places but I really think it's a must to know a minimum in french !
So, bienvenue...
I invite you to take a look in the Solsylva design.
I think it's a good design and you can make one with basic tools (no complicate cut).
Solsylva CNC Plans~ Home Page