Search:

Hi.
I have bigger machines ( VF2SS BT40 and UMC-750SS BT40 ) but would recommend Fahrion Centro-P and Schunk Tendo.
They are great in every way accept the price if you are on a budget.
//
Fredrik

Hi everybody.

My new Haas UMC-750SS will arrive in September and I have in vane searched for a Post, does anyone have one or do you know of anybody that does?

In hope of an reply.

//...

Hi everybody.

I have a Maho MH400P that today started to make some unfamilliar noice, the timingbelt between th servo motor and the machine is about to give up.
Does anyone know what kind of belt...

Hi.
Any success?


Hej.
Lyckades du med detta?

Hi.

I have a new Haas VF2SS and run mostly 5xxx and 6xxx aluminium and Pom-plastic, and ocationaly a part in stainles steel.

Wich coolant do you use and what do you recomend, what are your...

Hi.
Put the clock against the spindle bore and see if it's correct, if so the problem is in the holder-Haimer
If you rotate the Haimer probe in the tool holder 180 deg and it behaves exactly the...

Hi everybody.
I checked the dc power supply and it turned out that there were no output +5v +12v -12v when it got 120v input, so I bought a Corsair PC power supply and got rid of all the wires I...

Hi everybody.

I have a VMC 3016 HT MP32 -97 and has noticed something peculiar, I have at this time no heating at my work shop and as it gets colder it takes longer and longer from when I put on...

Hi.
Thank's for the reply.
The cam-program puts out a G2 or G3 depending on the direction so it should be correct.
I have gone through some manuals today and there is a Gain setting in the SV menu...

Hi everybody.

I have a 3016 HT -97 with 32MP controller and I have run in to a little problem.

I am trying to run 6082-T6 aluminium at 450mm/min with a 6mm 3-flute carbide aluminium end mill...

Thanks for the advice.
Unfortunately I don't have a A-axis blind plug but I will try to get one.
I removed the logic cables on the amplifier and haven't had any problem since.
If it comes back I...

Hi everyone.

I have just become owner of a VMC 3016HT -97 with 32MP system and as with an older machines there are unfortunately some issues.

The machine was in production, everything working,...