Search:

I have Bobcad-Cam version 30 and had it installed on a Windows 10 computer and had to reinstall it on a new computer using Windows 11. Since installing on the new computer to be able to pick any...

I changed number 2 to this, which is putting the rapid_move, zr in front of the length_offset. Seems to be working, I will have to see if I need to edit 3 any. I fogot to mention this is for a ...

This is my original post

2. Start of file standard
n,"M06",t
n_forced,feature_name_comment
n,absolute_coord,"G57"
n,spindle_on,s
output_primary_rotary_index...

Thanks for the reply, I made a copy of my post and have been editing the copy and experimenting with it.

I have version 30 and my post processor is not posting a G43 code or a H number for my tool length offsets . I opened up the post processor and on line 14 and line 45 it shows the G43 in there on...

Yes we thought of that but the Diameter is .250 and we need a diameterof .500 for our application

Is there anyone who makes precision pin gages to check length instead of the diameter? I am needing one that need to be 1.000 long and needs to be certified. For my application the body needs to be...

Thanks for your reply Engine Guy, SeanDa's reply was exactly what the problem was.

SeanDa, that was the problem. Thanks for your help!!

I will take a look at that and see if that is the issue and let you know. Thanks

You can ignore the lines in the middle , we tried that to see if it would clean up the area we wanted to mill out the pocket in. The area between the outside green line and the inside brown line is...

Need some help please. I am trying to figure out how to mill out the area between the 2 brown lines in the enclosed picture. I have tried evereything I know how to do but haven't had any luck. I have...

64 bit

Yes they are great

We don't have a active support program for updates,

- - - Updated - - -

Sorry hadn't replied, I went out of town for the weekend. I am running Windows and the build number is 1134. Is there a way to uninstall and reinstall Bobcad and be able to save all my tool settings?

Here is a Auto cad drawing file that is causing issues. When I try to change the default center drill to the .250 Guhring carbide center drill it dose it or the default drill to a #31 guhring drill...

See attached file. Thanks!

In V26 when I go tool the tool library and choose a tool Bobcad will just set there and then say Bobcad Mill Hole Wizard is not responding and close the program. Anyone else had this issue and if so...

Aldepoalo, I am having another problem. For some reason my X coordinate is .094 over to the right from where it is supposed to be. I can not figure out whats causing this. here is a shortened copy of...

What I finally figured out is that I had to use a different drawing file for my hole and change my post to G91 incremental mode and then edit it into my existing program which was in G90 absolute, I...

Hoping someone can help me with this, I am making a plate that has 108 holes in it 1.564 diameter. I am wanting to spiral in with a .500 carbide endmill to mill out the holes to within .015 of...

thanks for your help!! after doing this it generated a subprogram for center drilling & drilling & reaming and used the same n line coordinates for each process but it had a z-value and also a feed...

I am new to bodcad, I have V26 and can not figure out how to make a subprogram in it. I have 4 plates on a fixture with 112 holes total. I am wanting to use a sub program to cut down on the size of...

I have a Takisawa TC-2 lathe with a fanuc OT controller. When running my program the chuck will come to a complete stop set there for a few seconds and then start back up on it's own again. This...

Just bought Bobcad V26 after using a program called W-Cam for years so it is a big change. I have followed the tutorials and can draw different things but my question is when I import a drawing file...