Search:

M6 T1
M6 T2
M99

Working no any problem, can check also calling 9001 program

Same thing does not work/call 9001 in MDI mode

Parameter lost and we load again (we dont have orginal backup...

Hi

We have a vmc machine with Fanuc 0-MD controller

There is a problem M6 T command cant lunch 9001 program on Mdi mode , but auto mode called 9001 program and tool change work well

240 =...

Hi

We need nomura NN-20BIII swiss lathe parameter sheet for Meldas 500 controller

Machine label as attached

Hi everyone,

Machine is Nakamura tome slant turn-2 with FANUC 10TE-F + FAPT programming

Machine power on, operate manually and zero point is ok, manually turret +spindle + tailstock etc.......

thanks

Thank you for your reply,

sorry i need to confirm cause mitsubishi insist about 99 input can load plc (o250) to QX812 cassette, exaclty i need ram cassette, right?

Hello All,

There is a Cnc lathe with meldas 500 system , QX812 user plc cassette defective and get U10 illegal plc error 000F

There is no plc on our machine anymore

We have orginal plc ,that...

Hello ,

there is a slbus initialization error while power on, machine is vs50 with Fanuc 18-ima ( seicos E-18M)

after change 9988 #4 parameter, machine gave 790 Bram error, we clear it by...

Hi everyone,

We need this machine parameter and diagnostic sheet, or backup files, both of them ok for us

Thank you

Yes exactly

Today i checked status monitor and realize in-position memory is ON, it should be turn off, ( have same machine- so compare)
And check 1827 parameter value, all axis 30
I change it...

Hello

We have VK55II with seicos mIII controller

This machine is waiting when Z axis operate with G00 if use with G1 then program is operating or without Z axis program all other axis working...

Hello All,

We have a machine that established G code system C, ex G92 is not thread cutting cycle, We can use G78 instead of it,

We check parameter manual, that say parameter number 36#5...

we got 22 amplifier not equipment alarm so we would like to remove axis one by one to determine which driver cause problem

Any one help

Is there any information??

Hello Guys,

We have a mazak H410 with mazatrol mplus, all documents that we have , We would like to Remove x,y axis driver or z axis driver from the system but we dont know how to do it

There...

Hello again

For this problem we checked all cable but their condition is good

So last thing is masterboard because pulsecoder and velocity unit connect to CV1-CV2/CF1, CF2

Is this...

OT-A,B,C or D

Especially D is different than Others

Which one yours

Gtmondock, underthetire
Thank you so much, After check it, i Will post result

Hello,

We have a moriseiki sl-2 ,fanuc 10t controller, dc velocity servo unit

Does anyone meet this error beforeX Axis : SV 011 LSI overflow error while machine ready and x axis move...

Hello again

Today Memoryman told me to clear fapt side pressing BS key while power on, then mý machine is working, Another 3 machine also working, im so glad to meet with like this valuable Person...

Thank you

I checked again but Board number is correct 0129/06C
Just curious we had a machine with ram parity error only battery Voltage zero and cannot clear memory and can not solve ram parity...

Hello Again,

First of all we found same machine with same controller and spec number

We swapped all board on f-bus include power unit and flat f-bus board, all our parts working very well...

As i understand this problem caused by maybe base 1 or base 2, Or f-bus line? is it right?

Thank you

here attached photo after all procedure finished

Thank you for reply

video link is here ,

https://www.youtube.com/watch?v=NDvj0PMGoFo&feature=youtu.be


board number is A16B-2200-0121 and swapped one is same number include additional no...

Hello All,

We have a cnc lathe with fanuc 15tf (14 crt) controller,

There are lots of same topic on this forum also check them, but mine is little different

After battery voltage down , all...

I understand, We Reconnect all board from mori side, That is HR693,( optic cable board) and now there is nothing connect to mori and open the unit like this, still same, its likely lcd driver board...

first

The screen never get ok sinir since bought this machine, always like this, We suspect also meldas side but not sure,
If lcd driver board failure how it its showing screen Till booting...

All video can viewable, i check it already

http://youtu.be/awf3-Pu4OXA

Meldas error video