Hello
I have the following problem:
I have a finished turned part made of Ampco (mold core injection mould tools) ø40x90
It is a cooling channel, so the accuracy and surface quality don’t...
Type: Posts; User: koehlergung
Hello
I have the following problem:
I have a finished turned part made of Ampco (mold core injection mould tools) ø40x90
It is a cooling channel, so the accuracy and surface quality don’t...
Hello
I have the following problem:
I have a finished turned part made of Ampco (mould core injection mould tools) ø40x90
It is a cooling channel, so the accuracy and surface quality don’t...
Exactly, first the steep areas and then the flat areas with grid lines. Should work without problems.
Just try it.
Greetings koehlergung
Hello
Its just a gut feeling but I would say "Finishing steeper and flatter areas."
Greetings Koehlergung
Good day,
I also sometimes have this ‘problem’ with the tool bar but I don’t have a clue if it’s possible to save/fix it somehow.
I haven’t placed my macros there anyway. I call them over the...
Morning,
how is your display working plane lying? twisted or like your part is being clamped?
Hello
I had a look and I would say the only possibility you have would be using a macro.
Then you can apply it as a push button.
Regards
Morning
The PP gets first registered by a double click. Afterwards you should be able to use it. Tell us later if its worked
Regards koehlergung
There are now 10 versions of DEPO and the option 5 axis exists. As far as I know it doesn’t get developed any further.
Hello
The PP that you received should be a .reg file. Just double click on it, validate and then you should be able to use the PP!
Regards