A06B-6047-H002 control board problem
I have problem with control board from A06B-6047-H002 drive. when I turn on this machine, the diode HCAL little light. And machine have alarm. But if i wait...
Type: Posts; User: Sylwester1
A06B-6047-H002 control board problem
I have problem with control board from A06B-6047-H002 drive. when I turn on this machine, the diode HCAL little light. And machine have alarm. But if i wait...
hi, I have halbronn kiwa machine and need foto PMC parameter(counter,timer and keeprelay), my machine lost all parameters. Someone have this parameters?
Please helps!!!
best regards
hi, I have a lathe HAAS TL-1 and today there is a power supply error of 320V, on the power screen is (d). What is wrong, I dont have schematics for this machine.I check power resistor is 11,5ohm. And...
welcome, i have lathe with sinumerik 810m, but i don't have schematics. on machine appear fault 7001. I need to edit plc to find this fault. How can do it.
Can you send me this parameter,please.
[email protected]
Hello, I lost all parameters (battery was empty).Does anyone can send me all parameters for this machine. I will be happy.
LEADWELL MCV-OP ; fanuc O-M
best regards
Sylwester
I have problem with okuma ( control:OSP 700L) machine lcs 15H, I have external alarm 3901, which means this fault? How can i view the plc ladder in this control OSP 700L?
please i need helps.
Welcome, i have problem with revolwer on this machine. i have alarm 2032 REV. EINSTELLEN M10 . Does someone help me to resolve this problem?
FANUC O-TT
i have problem with keyboard,and connect external keyboard to ps2, works OK, but soft keys below lcd not work. How run this softkey?
I need to change screw about other pitch , what parameter pitch of the screw in FANUC Oi-MC.
I need to change screw about other pitch , what parameter pitch of the screw in FANUC Oi-MC.
welcome, i have problem with y axis, motor drifting when not moving and moving. where can i adjust drift balance for this motor. machine: Maho DMC 60U, millplus, simodrive 611. thanks for helping
I have lathe with sinumerik 810T, this machine fast loses data. After 1 day all data lost. Batery is empty. Can i use external power supply 3,7V output instead baterry?
please help me
I checked G98 codes and not working
warmly welcome
Machine lathe on FANUC OTD
I have to use handle for rod. but when am using G1 code without spindle rotation
the machine not move. I use this program:
M10 chuck clamp
M19 ...
welcome,
Does someone have this machine?
I'm looking for example program for automatic run this machinery with robot. and how programing robot.
best regards
Sylwester
welcome
I have bought CNC OKUMA LCS-15H, but have problem with startup .hydraulic unit is working correctly. But i have alarm 1069-20 VAC coil switch SPDL. I dont have manual for this machine....