Ok I've sorted it. Read through the earlier pages carefully, fitted the correct resistor, all sorted.
Type: Posts; User: Joz
Ok I've sorted it. Read through the earlier pages carefully, fitted the correct resistor, all sorted.
Hi
Could someone help me with wiring these switches - I have the Honeywell SS451A's
I'm easily confused and not electronically minded - a bad combination :(
I have a HG08 breakout board from...
I have had the same problem and a quick search of the forum lead me to this post- yep setting the CV angle to 89 degrees fixes the problem. The thing that concerns me though, it that the tool path...
Hi, I have built a gantry type CNC (3 axis) and I'm planning on building another machine (2 axis). The two axis machine will be a computerised crosscut saw for cutting guitar fret slots.
I don't...
Hi, I know nothing about how vacuum tables work so bear with me. I'm trying to work out how to make a vacuum table for my cnc router. I want to make several pods with foam seals around the edges. Is...
Ok guys, thanks for the advice
Joz
Hi I've got a water cooled spindle and VFD on a gantry style CNC I'm building. I'm turning it on and off via Mach3.
I keep forgetting to turn the water pump on to keep it cool when I run the...
alfy b, thanks for the advice.
"here is cutting data for a 10mm alu cutter with 3 flutes,that I would use:doc=5mm,s=2000rpm,fz=15mm/min and f=80-120 mm/min.And use loads of soluble oil,to stop...
Hi, wondering if anyone can give me some advice. I am a woodworker by trade and I've built a gantry 3 axis CNC machine. I read somewhere on this forum the advice "build an ugly CNC machine to make a...
Fixed! It was a faulty parallel port cable. I've replaced it and it's running ok now.
Thanks for the help.
Thanks- I have checked through the things you have suggested.
1. The 25 parallel port cable is not a "straight through" cable as such, it wasn't long enough to reach so I bought an extension for...
Hi, wondering if you can help, I am new to CNC machining and Mach3.
I have wired up my CNC machine and started setting it up to run on Mach3.
The problem:
Mach3 will not register the limit...
Hi I'm Joz. I'm a woodworker by trade and I'm building a CNC machine coz I want to make cool stuff :wave: