Hello all.
I am looking for a user manual or any information on Sodick K1c Small Hole EDM.
Any help would be greatly appreciated.
Type: Posts; User: nick02895
Hello all.
I am looking for a user manual or any information on Sodick K1c Small Hole EDM.
Any help would be greatly appreciated.
Looking to purchase our first Vertical CNC Mill and under consideration are HAAS VF-3 and Mazak VC-EZ 20.
My question is which is more reliable and prove to have a lower cost of ownership?
Why...
Moving to Bradenton, Florida in a few weeks and will need a job by Mid May 2019. 35 years experience in metal forming, High speed stamping .003-.060 materials. Troubleshooting, diagnostics,...
We're still looking, also for press operators, setup, assembly. again use my name as a referred to by.
You're correct, it did add parenthesis around #700 =#4003, the if statements and I can't enter it manually. says bad code.
Is there a work around for this?
I was successful copying the program to the machine. G47 does recognize 09876.
Now the error I'm getting is 331 Range Error.
Any suggestions on this?
Please email me O9875 so I can at least try it.
Thanks,
Nick
Results;
Machine A input works. This machine will run macros. This is the machine with the pallet changer and runs g47 code(engraving)
Machine B input=bad code, this machine runs g47 engraving...
We have 3 machines, 2 have the g47 working and one does not.
I turned setting 23 to off on all the machines to view the programs.
Looking at the 2 that work, only one had 9000 series programs and...
HAAS
VF-E 8/98
Getting error trying to run engrave G47
Do I need to have macros installed?
TE Connectivity is looking for a Tool and Die Maker for it manufacturing plant in Norwood MA. You can apply online. I can get a sign on bonus if you're hired, provided you use my name. Nick...
Does anyone use Surfcam V5.2 (or other version) with solids to do 2 axis milling?
I've been using Spaceclaim to make solids and I'd like to export to something, then import to surfcam, but all I'm...
I'm new to wire edm. We have a Agie 250SF with 1 system 3r Rail. I am looking for an inexpensive starter vise and maybe some other clamping fixtures. Ultimatly a leveling device would be great.
...
We recently setup an Agie 250SF Wire EDM. We are in the market for cam software and post for this machine. We have Surfcam for our Milling. Peps was recommended by the manufacturer.
If you use...
Ok, I eliminated the hardware as an issue. I used a laptop with the offline.exe software and all the configurations listed and still not working. The laptop's com1 is known to work.
Still...
Found the following commands in various files off the old hd.
mode com1:12,n,8,1,p
mode com1:9600,n,8,1,x
Tried both with no success. starting to think com is ng, need a simple test for com port....
Issue: No communications between pc and trak cnc2.
Facts:
Communications was working on last pc, 1 week ago.
Pc died, os was windows 95
New pc, os now windows 2000.
Hd was ok, copied files to...