Search:

I have a series 3 machine for sale. Has just about every option you can think of.
Atc
Super saver 8“ 4th axis
Enclosure
Path pilot
Probe
Spindle speeder
Tons of tts tooling
Upgraded...

As I look at the design i think the premade cylinder mount is going to be the week point especially with only 1 end supported. I will likely fabricate the riser block and mount out of one solid...

As to not dump a ton of cash or time into a project that may not work I have a prototype designed to do some testing on. any suggestions from you guys as to improvements/changes?

I am not going...

just confirmed with my local Haas trainer that what i have above is all acurate and good to go
im going to work on designing a fixture to ride on a set of linear rails, hopefully it will be plenty...

Sorry I should have been more clear. I would like to put it on linear rails. My first thought was an air cylinder to push it in and out. If you wanted to get very fancy you could also put a...

I have a super mini 2 and I am finding myself not using the tool setter alot in order to use the max travels of the machine on my fixture. From the controls perspective how hard would it be to...

Figured it out I'm dumb thanks

Sent from my SM-G900V using Tapatalk

my super mini mill just arrived from haas. still not activated from haas yet so i cant check this for myself. I did not purchase the Ethernet interface upgrade. I was digging around in the control...

Have a haas SMM2 ordered getting my ducks in a row. Ordered a American Rotary ADX30. I am really taken aback by the min wire size for the 3 Phase inverter.

American rotary states that the...

One other note is that as part of the fixturing of this job after the holes are tapped I need to take the pallet off the table and put screws through the back side of the pallet before the final...

Just getting into a haas smm2 and need some advice. Never was able to rigid tap in my current machine. I have a large job waiting to go as soon as the machine is here and running. I need to tap...

Servos. Looking at hand super mini 2

Sent from my SM-G900V using Tapatalk

Yes it's finished and works great but it's for sale now as I need much faster machines

Sent from my SM-G900V using Tapatalk

What if I brought it to you. May be heading your way to pick up another machine.

Sent from my SM-G900V using Tapatalk

Yea if you look in my post history it's in there. I really just hate how the doors slide on a peice of pipe for tormach. And the price is a bit ridiculous I think.

Sent from my SM-G900V using...

sorry about that added it to the post

Need to make room for something pretty quickly here so the Tormach PCNC has to go
Series 3 machine bought in mid 2013
Located in Erie PA
Medium amount of use, no paint missing from the machine or...

Just launched my first kick starter campaign with resounding success

Check it out
https://www.kickstarter.com/projects/fortiusarms/keybiner-the-carabiner-refined


Sent from my SM-G900V using...

What chips? 265932


But seriously a dust deputy is great investment no doubt

Sent from my SM-G900V using Tapatalk

I need this in my life

Sent from my SM-G900V using Tapatalk

You have to run the config program. Select the profile of the machine (series 3 atc etc etc), then at the bottom is a drop down.


Orrrrrr
If you know how to use ports and pins config in...

That is awesome to help schools and stuff. I've never quite understood how all that grant stuff works but helping people learn by paying for equipment is a solid foundation

Sent from my...

I agree with mountain dew. Consider how you will get it on and off. It is a real batch to get the 8 in super spacer on and off.

Sent from my SM-G900V using Tapatalk

I use the 8 inch super saver. It is more pricey but I think it's worth it. Not using the atc is not an option in my mind. Also I needed the larger through hole of the 8". I hate buying...

FYI you can adjust your limit switches and gain about an inch of travel typically. My fixtures are the same size and I can clean off all the sides with a 3/8 end mill.

Sent from my SM-G900V...

Interesting. What does that cost? My first thought is how much does that thing weigh. And my next comment would be there is no way it would work on the left side of a tormach table with atc...

My thoughts exactly. Came with 2 sets of jaws as well. One hard one soft

Sent from my SM-G900V using Tapatalk

I do like the chick but I just got it and will have to use it before I pass further judgement. Only reason I got it is because someone fairly local was selling it for $300 and it's never been used. ...

To think I had nothing but 2 4" Chinese vises 2 months ago261414

Sent from my SM-G900V using Tapatalk

I have one comming from the company tormach gets it from. I went direct. Can't wait

Sent from my SM-G900V using Tapatalk