Search:

Hello to all
Hawe problem with bosch cc100m controller
Lost parametres due to no change off batery.
Purchase these machine in germany with these problem
Now the machine its in my factory...

Here are some photos off the boards

Thanks for your help

Guhl my frend how are you hope for the best to you
Yes the crt and the machine are ok they are working super

We need more memory in the machine number 3
We need the parametres to changge for...

Hello memorymen and guhl
Hope you are ok
The men from fanuc came todey and fix the 2 machines
We are happy todey
Hi hawe a small device and tok from the 3 machine direcy from the mother board all...

In trumpf v 85 s we had the same problem
Its propotional valve problem at oure machine and the oil was old roynd 17000 hours
Chanche new oil new propotional valve and new oil filter
Machine ok...

Hello to all
Fanuc to us charges on site no parts involved is 160 euro per oure like 190 us dollars
For the road trip from bulgaria sofia to macedonia in tetovo its round 300 kilometres and...

Fanuc its to expensive
Ay need a independet company with a test bed and repair capabilties

If you now any company will by great
Thanks in advance

Hello guhl and memorymen
Yes the mother board hawe the HD46505RP
We hawe teste them its the 1 its grund GND
And the 20 its 5 volts
We chek vss and vcc the syply and input power its ok
Regarding...

Hello guhl and memorymen
Yes we did these with no results only the graphic bord wen is out the screnn its on but only gren no numbers
We swapt bord from one machine to a nother no results
If you...

Hello
Last week we resive a fanuc servo amplifire from germany for repair and they did a fantastic job with 12 month garantie
For servo drive for servo amplifiere these company is the best
...

Hello memorymen
We are traying oure best no results
If we send the complete assambly to you can you do the repair and test ?
If you was i oure position ?
You can send as a offer for both complete...

Hello all
We need a fanuc repair company
We hawe a motherboard and all the cards to send for repair
Motherboard type
A16B-1010-0210/16D
Atachet in the board are
I/O C3A A16B-1211-0300 A...

Hello
Wen you hawe the problem with motherboard did you screen was blank and the machine will not start?
Did you bay new motherboard or did you hawe to send to the repair company?
Can you tell as...

Hello memorymen
We hawe chek all conection ,relay coils in the machine all are ok
We think thet motherboard or some memory card wont give the signal to the crt scren and them machine starts
...

thanks for you reply
In you opinion you think the mother board asembly and the bords atached are ok
Regarding the relay /coil we hawe to chek them all the are many off the in the all machine...

Hello memorymen

Yes after swaping the motherboard to the original machines the both machines the display the screen are blank

After power down in both machines the screen blinks for a sec
...

Hello memoryman
Thanks for you post
The idea off the change off mother board from machine number 1 to number 2 olny was for diagnose propose the machine number 2 vont transmit the programs from...

short description of our problem.
We have 2 punch machine Murata Wiedeman Centrum 3000Q with Fanuc control OP-B.
Our FANUC OP (model B) stopped working: the screen is blank and there is no...

HELLO

we need the manual for the teach pendant asea robot or abb S2

IT WILL BY MUCH HELP TO US

thanks in advance

sendet in [email protected]

hello

need help with the asea irb 6 robot

we need the programing manuals its missing with the machine

and we don't haw the disk

how it possible to change the language for these robot...

HELLO CNC MOLD

these is happen if you disconnected the cable from the servo,or the encoder is fealty.

you are making mistake ,wen you turn the machine on you hawe alarm 300 yes.

go to...

hello

we hawe the same problem with murata wiedemann turret punch,ween we make big programs we devide these in .PAT

HAWE NICE DAY