Search:

Which software package made this code snippet?

G1 X4.785 F.02 // LINE:3;LINEAR
X12.585 // LINE: 3; LINEAR MOVE;
G0 X7.282 Z215.834// LINEAR:9; RAPID
G1 X5.868 Z216.541 // LINE: 3; LINEAR...

Information is not recording in any offset, in this case offset G154 P9. We are trying but it will not accept information.
This is one of the routines that we have that does not work. Please help....

Hey Samu thanks it work great I'm sorry so late

I need put back the tools to the same packet because the diameter of the tool is big.
When the program is running the tools are put in any packet back so when tools of large diameter come together...

I need to put the tool in the same packet from which was take it, for example if I take the T01 from packet # 1 finished work how can I write the program so that the tool T01 back to packet # 1

Already try and work.
Thanks for you help

I will check it out.
Thanks

My Company got new Machine Okuma Millac 761V Serie 31i Model A5 with Facnuc Control I writing program now but I have some issue to get in the program amchine home position, this what I have so far:...

Thanks Broby

It work the same for Inches?

That is my question, I want the formula because I want to apply it to any speed, for example if I use 300 rpm or 1500 what gonna be the feed or if I put F19. how much gonna be the speed for any...

Somebody know the formula for feed vs speed
Thanks

Thank you very much for the help, I did change and it worked very well and I'm sorry for not giving all the incorrect information, I know the answer would have been faster and easier to understand...

I'm sorry is my mistake it is OKUMA.
Thanks

Here is the program.
In the beginning of the program find X, Y and Z, after that load this information in H1 so when I run the program it read X and Y whit no problem at all because the values ​​of...

Hey no problem I will post today afternoon, I need help, so I will do it, I have not time right now.
Thanks
Sergio

ok, I will do it,
Thanks

the Zero Set (H1)said X=3.0728 Y=1.2669 Z=5.4134 when the program find location for make a hole the the control used X and Y but the Z is from tool offset T01=3.699 shout be Zero Set Z=5.4134 I hope...

The machine is Mori Saeki MC50VA

fanuc control, no any alarm at all, just when run the program show me that, the variable H is using offset tool
Thank Brian

I need help with a program, when I use the variable H1 or H2 or any of this, read the X and Y but I don't know why they read the offset of the tool and do not read the Z as it should be, I used this:...