Can anyone recommend where I can get this motor serviced/repaired? Teknic does not communicate with end users.
Regards,
Joe T.
Type: Posts; User: Joe T
Can anyone recommend where I can get this motor serviced/repaired? Teknic does not communicate with end users.
Regards,
Joe T.
Are you sure? Mach 3 was not, but I am told by several vendors that Mach 4 is.
Regards,
Joe T.
Mike,
First off, I am not a CNC technician.
I have a CNC router which uses four Teknic M-4780-FH/H1 servo motors and four Teknic SST 3000 Servo Drives. The machine has a problem which took me...
Mike,
Thank you. I was hoping you had subscribed to this thread - - - -
Well, you just ruined my day!!! ;)
I had hoped to upgrade my router from the Teknic M-4780-FH/H1 servo motors with...
Mike,
How many Teknic 'units' do you purchase in a typical year? In other words, what volume justifies becoming an 'OEM?'
Regards,
Joe T.
"I am having serious problems with red algae growth in the cooling water. I tried Auto Antifreeze, Detergent, pool chlorine slows it down but god knows what that is doing to the spindle."
Have you...
islaww,
I just looked at your information at the bottom of your post. Gary, you and I have had these discussions on the phone ad nauseum. .
I don't agree with your statement: "The world is,...
First off, I would like to apologize for not replying to this post MUCH SOONER! I guess I missed the email notification that was sent when it was posted - or my senility is running amok again! ...
All,
I am still working on a set of charts/slides that illustrate what I have done to date and hopefully show that the problem SEEMS to be WinCNC control system problem. If it is not a WinCNC...
gfacer,
I am still working on a reply. Lots of photos, etc.
I'll post in a day or two.
But, yes, the 'Shift' is very repeatable and only happens when there is a '3D' move.
Also, you...
One final comment:
When I was running these 'acceleration tests,' I stood near the work offsets 'X0' location. During the single and two axis moves, the spindle came back to the X0 location...
Let me clarify the above post:
The 'X-Shift' occurs ONLY when there is a 3-D movement. What I mean by this is that the spindle is moved in the X/Y/Z axes simultaneously. If it is moved in only...
All,
I have identified the source of the problem. But, that 'source' could have one of several root causes.
I have continued to run diagnostic tests.
If you remember, I originally thought...
All,
An update:
I have been trying to understand why my CNT Motion router 'gets lost in X' for a long time. I decided in early July to take a more structured approach to trying to understand...
All,
I have made some progress on my "Drifting X" problem. I performed a parametric evaluation and learned a lot. The main thing I learned is that my problem is not one of noise or cross talk. ...
I just got my "DEMO" version of EditNC extened (7-14-2015). I will finish the programming of 4 test blocks, the EditNC APT.source to G-Code conversion and the modifications to make the G-code work...
Gfacer,
Thanks again for all of your help.
I have a number of oddly shaped rigid urethane foam blocks given to me by a friend who makes master tools for the composite industry. These blocks...
gfacer,
The 'H4" is one of the 10 'Home' positions. That is how one calls it out in a program. How these 10 HOME positions are different from the 10 'Positions - Local or Absolute,' I don't...
gfacer,
I would be happy to email them to you. I have all of the macro files, Win.ini, and others.
I tried to run this boat anchor again today. You know the non-soft limits? Well, look at...
gfacer,
I thought you might like to see the '10 Homes' and '10 Positions - Absolute or Local.' Plus, a couple of other oddities like 'Creating Home.' Finally, one macro that seems to still be...
gfacer,
Thanks for the inputs.
I had Kelly Davis of WinCNC remotely log in to my machine. He checked all of the macros and the WinCNC.ini file. He found a lot of problems and corrected them...
My machine has two drop-down windows. One allows the creation of up to 10 'HOMES!' Real G-Code only allows for one home.
The other drop-down window has one tab that allows up to 10 'POSITIONS'...
gfacer,
Thanks for the offer to discuss this problem of mine. I have a lot of programming questions such as having macros for 10 HOMES!!! Also, 10 POSITIONS which can either be Absolute of...
gfacer,
I am surprised you do not use soft limits! Every time you 'HOME' the machine will go to the hard limits and that can be a problem with hitting the hard limit switch too hard. Also, when...
Good luck! I am interested in following your story.
I, too, have a CNT Motion Series 1000 router that needs some TLC. It is nearly 'new,' but was built in ~2003 -- very low hours.
I have...
What are the working dimensions? Age? Price?
Regards,
Joe T.
Cabnet636,
If you could direct me to someone who has a lot of experience setting 'work offsets' using WinCNC, I would greatly appreciate it. I need the ability to set the local zero (part zero,...
Thank you.
I have spoken to Kelly many times. I truly appreciate his help. But, I am afraid I am becoming 'a bother.' Actually, I plan to call him today for more info.
I wish there was a more...
Thanks. It will take me a while to absorb all of this.
Regards,
Joe T.
- - - Updated - - -
Thank you. I will check it out.
I am very interested in WinCNC. I have a CNT MOTION Series 1000 router, circa 2003 with a control software and computer update in mid-2010. I bought the machine used and I am trying to learn to...