Search:

Gerry, please do not give up on me,
My copy of 7.5 which I resurrected is behaving the same way, exactly. there has got to be a simple setting or procedure I am missing.,
I called the distributor...

I have more information: I have learned that it is not related to the tool setup at all:
I opened an existing drawing, done in previous version of alphaCam.
I deleted the tool path from a...

maybe I should have said this is the latest version of alphaCam advance router. previous was version 7

ger21, I imported the tool files from the previous version which was working, I looked through them anyway and they seem to be correct. tool in use is simply a 3" long rounter bit, 2.2 inches of...

It has been four years since I had to create new nc files for cnc router. I had this problem the last time I used program and can not remember the solution. Just remember it was simple.

I create...

Sorry again, and thanks again., I got an email with the password. thank you

Thank you, I found that one on a google search, and downloaded it.
When I tried to run it it showed a msg box asking for a password.
Went back to the website and found a password for opening...

OoPs, posted my follow-up in one of the links I was following. I should have said for windows 7 64 bit system. I have followed all the links but have not found one available yet.

Sorry, I should have added, for windows 7 64 bit system. I have clicked all the links I found so far, none seem to be right for my windows version/bit

After a search of posts, I would like to know is there a simple, hopefully free or inexpensive software just to transfer files from PC to CNC, I purchased new PC and old software will not run on new...

SORRY MACTEC54 GO Z20.0 YIELDS AN OVERTRAVEL ALARM ON Z AXIS.
TRIED YOUR CODE. i ADDED M12 THIS RAISED THE HEAD AS I NEED
BUT THEN IT DID NOT MOVE TO X OR Y LOCATIONS.

Thanks everyone, with your help I learned enough to find the rest in manual. FYI the movement I was looking for was listed as M-Code, spindle function; 1--spindle down, 2-spindle up 3-spindle on and...

yes yes yes, I am sure this is what I am looking for. just one issue I can not find. There is another vertical movement other than the z axis that must be made before I cross the center of the table...

I have more than 100 programs created with alphaCam,
Each of them perform a routine twice, once on each side of table.
This allows operator to remove and replace stock on one side while otherside...

surely this has been resolved by now, however, just in case
My andi stratos using mdi command t alond with spindle no. and o to
t 10 would remove tool from spindle 1

other wise I am confused...

My motor connected to ab ultra 100, is overtemp and faulting out
Connect on device net
Was monitoring the data using networx for device net and the position error would change constant + or minus 3...

does this look right. at least I am learning something

Start
‘(start up)
%
O0015 (start up)
(Produced on Thursday, February 08, 2007)
(1 total ops)
G91 G28 X0 Y0 Z-1.5
M94 T10

I am a new member. I posted this in the club house and maybe tht was the wrong place. I currently use MDI to start up machine. I enter
m91 m28 x0 y0 z-1.5

then
m94 t13
m97 t13

I have...

i have an andi (fanuc) cnc router. I need a program for start up and shut down. Now I manually zero then enter m94 t13; m97 t13. and manually move the tool from the carosel t13, to the spindle. What...

each day at start up we take a tool out of the carosel from number 1 holder tool 3 and put in spindle then we key m94 t13 ... and m97 t13....
is there a sequence to tell the machine to get this tool...

thanks for reply nutmegtech,
Production is not down, we cut holes in steel doors for installing windows, not real high tech for these machines. We previously used a hand router and a stack of...

I thought of something else which may be relavant. We have tow of these machines. when we"zero" them the x, y display different numbers. they are all zero.something but not the same. I was told this...

thank you for responding and forgive my previous frustration.
Heres what I have learned so far. The "stops" are not easily adjustable. I could give more details but prabably not neccesary. basically...

apparently I am not intelligent enough to word an issue clear enough to get any type of responce.

Some one perhaps can tell me how to unsubscribe

I am quite handy with PLC programming and visual basic programing and belive with instruction i can accomplish this.

I have a cnc router by andersonUSA. it was setup four years ago. There are hard stops on the x and Y where material is placed. these were replaced and now i have hundreds of programs that are off.
...