In case anybody runs into this same problem. It has an amazingly simple solution. Go to the folder page highlight the program you want to save.
use COPY then change the devise to whatever your using...
Type: Posts; User: TWyatt9
In case anybody runs into this same problem. It has an amazingly simple solution. Go to the folder page highlight the program you want to save.
use COPY then change the devise to whatever your using...
We have 5 Akari Seiki Mills with Fanuc controls. For some reason this particular machine has a different version. Can anyone provide me a
procedure for uploading and downloading programs? All my...
Can anyone tell me the Parameter changes or other Process to Drip Feed my Horizontal Mill from a Compact Flash Card?
I currently work for a Firearms Manufacturer. We are machining Pistol Slides and need to achieve a zero tool mark finish. We sandblast these as a last process before PVD coating. We would like to...
Is anyone using one of the new "green" Soy based coolants. If so what do you think about it? I'm really looking for something that I can pour down the drain after skimming. Are there Way lubes...
Custom I couldn't agree more. It reminds me of the definition of Luck. Its where perspiration meets preparation. Things are what they are right now. you just have to work hard and make the most of...
Thanx Dual It all just sounded to good to be true. After spending a little time whith there salesperson yesterday I was not at all convinced they where going to do anything for me.They did a lot of...
I make all my own vise jaws we can crank these out so fast that it doesn't pay to buy them. Three jaw chuck jaws are a different story. i found the guys at Monster Jaws on EBay 33 bucs for a set of...
I realize that this is probably not the right forum. But I figured the RFQ people on here could give me some feedback. I'm looking to branch out into some Aircraft work. My background is in the...
I saw that manual Jason does it have the parameter discription in it? How far do the parameter numbers go? 1200? or just 6000-8999. And by the way i have the parts list for my machine it could be...
Thanx for the info Jason. I already have the Yaskawa manuals I'm looking for the mori manuals there more machine specific than the Yas ones. I've got my service guy looking for them for me. Mori has...
Worked fine only problem after changing parameters I left the switch on parameter and when I sent the program out to the machine it overwrote all the parameters. Do you have access to a copy of the...
If anyone has a set of manuals for a SL-3H with Yasnac LX-1 controls. The maintenance and Operation in particuliar. Also the factory parameters on disc. I pulled a BoneHead move. While setting up the...
Does anybody have the Config for the cable and the parameters ie baud rate stop bits end of line tag if it needs it also ISO or EIA parity Data bits. Basically all the comm parameters. I'm sitting...
I have a Mori SL-3H that my machine mechanic tells me has parameter problem which is no problem if you have the originals which i do not. If anyone has a copy from their machine I'd be glad to pay...
Thanx for the info I'll check it out.
Does anyone have the procedure for realigning the turrent on the Mori SL-3?
I've done this on a Mazak but I'm pretty new to the Mori.
Tim Wyatt
...
Phix I have a LX-1 control the switch I'm talking about is the disconnect switch where the main power comes in to the machine. Everything is turning the proper direction so I'm assuming the Phase is...
Thanx Phix i found the manuals online appreciate the response. Tim
Good afternoon all I have a Mori SL-3 that had been without power for quite a while. When I power up machine doesn't sound right. I checked the incoming power and it checks good. But on the other...
Morning all I just bought an older Mori SL-3H with Yasnac LX-1 controls. I got the Parts list and the Programing manual. I'd like to find the Maintenance and Operation manuals. The one with the...
Call Maruka their service is great. I had a similar problem with my Mori Milling machine they had me up and running in 20 min.
PPM Inc.
...
Does anyone know if you can get stuff repair or exchanged on these old controls? I'm looking at a used Mori SL-3H thats in great shape no problems right now but it's a 23 year old machine. Any info...
Opened up no problem. What is your tol.? Do you want shipping in the quote or seperate?
Tim Wyatt
PPM Inc.
9347 Denton Ave.
...
I was using an old copy of Easytalk that I've had for years. When I got a hold of them they told me that it had problems with the dripfeed. So I got another DNC program and it works great.
...
I know that you said an electrician wired it but it wouldn't be the first time I've seen it done wrong. If they don't have the high voltage wire in the correct place on the disconnect it could cause...
Good Afternoon I'm trying to run a rather large program using my office PC it only gets so far and kicks out this error. Anyhelp would be greatly appreciated.
...
I need a CNC lathe 24" between centers with fanuc controls.
Thanx in Advance
Tim Wyatt
...
I understand this is a lathe forum but i couldn't find a Mori mill forum. Has anyone replaced the Z Axis thrust bearings on one of these mills? Is there anything special to worry about? Setting the...
I'd like to bid on them.
Thanx in advance
Tim Wyatt
Precision Performance