Jim, that article was really helpful! The customer requires a 3B tolerance. I'll hunt down a larger "H" limit and see if that helps.
Type: Posts; User: chartwar02
Jim, that article was really helpful! The customer requires a 3B tolerance. I'll hunt down a larger "H" limit and see if that helps.
I'm threading a high silicone cast aluminum using a Guhring 1/4-28 UNF STI 3B Modified Bottoming TiN coated tap about 7/8" deep. I'm using the same type of tap (5/16-24 and 10-32) with no issues....
For over a year now we've had this end mill randomly break. This end mill runs 200+ parts cutting four .30 wide slots, .30 deep per part using a trochoidal tool path. It's currently running at...
Open up your CS. By default there should only be XY plane. I like to relabel it as G54. Create a new CS. Again, label the new CS as G55. With the G55 CS selected, open up your CS pallet located...
I'm trying to turn and mill between spindles on a Mazak Integrex i-200S. I can use M511 for both but when I go from a turning operation to a milling operation, my C and U axes lose synchronization...
I have been goofing around with the MDD editor. I played around with the different coolant options and adding multiple selections. Unfortunately I didn't see anything that would allow me to define...
Looks like I'll need to get me that Compost program. I've found the "coolant 8 9 7 on, off & mist m code" line. I'll try changing it to what I want. We have machines that have more than two...
Hi everyone!
I'm trying to add different coolant options. I've figured out how to add the options you may use when programming a tool path, but the code is still processed with M8's no matter...
In GibbsCAM, go to:
File
Preferences...
File (Tab)
Under File Extensions, you can change the Post: from NCF to EIA. Now every time you post, it will automatically post as an EIA.
I was...