Search:

Can anyone please send me a copy of the ladder and sram files?
The ladder is 473H. Version 5

I am having the same problem, I think. The BMDC wasn't loading I replaced the ribbon cables and cleaned the AuxBob cards. Now the BMDC loads but when I tell it to home, it just sits there and tosses...

I was soooo close!!!! I got all the parameters to load.. Booted the machine up, homes it, indexed the turret. It was beautiful!!!! Turn on the spindle.... Nothing... No problem I tell myself. This...

Update

It WAS just the pin/ribbon cable. I Now have communication with the machine. Now I just need to figure out how to load all the parameters that were on that floppy into the Control. The...

Well I called Fanuc and the guy told me if it doesn't see the card reader in the boot menu (where you format the cards) then it would be a hardware issue. Hopefully it's just the pin/ribbon cable...

Zach
The parallel port is aka a printer port. A pc without one is stranger than a machine with a mind of its own.

The radius of a 3/8 cutter isn't.375 that's the diameter. I have never ran a haas but if you don't have the r values for the cutter set in your tool profile a mori will do weird ****!!!

Well the estop error cleared but I still can't read the pcmcia card and the rs232 has issues! Some knucklehead tried to fix a problem that didn't exist now the thing won't work. There is another...

The machine will not communicate. It doesn't recognize when a pcmia card is put in the port. It says "insert card"
I have checked and rechecked all the parameters under the (rs232) section. Is there...

Lmao thanks I'll be needing some luck I think. It has a pcmia reader but now it's getting an emergency stop fault. Sigh....

I run mazaks and mori's. A friend of mine has an old Romi g20 that lost its parameters. The back-up disk in the door that all machines have is a floppy!!! See the silly thing is.. I can't seem to...

Suppose you had an old CNC mill that was running eztrak on a ramdrive from a floppy. Then some guy walks into your shop and installs a hard drive with the software loaded on it. Now you don't lose...

I think i got it figured out but i need to edit the ladder and that seems to be an ancient chinese secret! Anyone up for teaching me how to edit the ladder?

I am just starting to learn the Mazak and all the parameters. I have found on different forums where you can turn the chip conveyor to intermitant. The problem I am having is the parameters they say...