I have 12v 5A PSU powering BOB. I know about that. Breakout board is working perfectly before it is connected to the VFD. Every voltage is correct and outputs are working as expected.
VFD manual...
Type: Posts; User: FrisscoCBR
I have 12v 5A PSU powering BOB. I know about that. Breakout board is working perfectly before it is connected to the VFD. Every voltage is correct and outputs are working as expected.
VFD manual...
Nope, i have it set right actually. Thanks anyway.
Hello everyone,
So i have a problem with controlling my VFD with mach3 BOB
This is the BOB in question: https://www.vallder-rs.com/en/c/300/38/stepper-motor-drivers/mach3-5-axis-board-detail
...
FINALLY! After all the things i tried it was simply bad or to long usb cable!!!
The connection between my arduino that controls the CNC and the PC was at first like this:
First i connected the...
Yup i know about possible ground loops and i tried to see if that is the problem.
At first i tried by actually getting a cable run from my neighbours house(he has a seperate ground i measured it)...
Well i had the opportunity to choose between 1ph and 3ph VFD and i chose with 1ph becuase of easier cabling and it is only 1.5kw VFD. That what i chose. Also to point out is that i am using different...
Okay, so this is my first post here.
Hello, i have a really big problem with what is thought to be interference from vfd, here i will explain how it is manifested.
First thing first, i created...