Search:

OK, I figured it out, with your help of course.

#2000's are for X wear
#2100's are for Z wear
#2200's are for R wear

Thanks for ALL your help.

Thanks SteveO. I haven't tried this yet, but should I be able to do this in MDI also? I tried in MDI and in the program the 1st try and neither worked.

BTW, we do have macro B.

OK... I'm missing something. I put #2202=[#2202+.0001] in the end of the program before it looped back around and it didn't do anything. No errors, no changing offsets, nothing. We wrote down all...

So... If I can take an educated guess that the ID cutter (Tool #2) wears .00005 EVERY part (wear in X), then I don't have to do the counter and IF statement, correct?

All I would need is...

I am running a Wasino G6 w/ Fanuc 21i controls. I'm looking for a G or M code or macro to automatically increment the wear offset register. One of our tools seems to have a predictable wear amount...

We have a Mori Seiki Frontier M1 VMC (1994 vintage) being transferred very soon from one of our other facilities. The machine has been checked out by the service tech and everything looks...

We received an arbor from one of our customers in Germany to grind parts on our OD grinder. I was measuring the arbor so I could reverse engineer it and make a duplicate. When I measured the center...

OK... Sorry for not being more specific. The drawing shows the slot with a dimension labeled "19". I forgot to change the dimension. The 19 refers to our control plan feature number and is just an...

The pdf should be attached.

We have an Okuma Captain L470M with OSP-E100L controller and live tooling. We have the lathe program complete but I need help with programming the .596-.604 slot using a .500 endmill and using our...

The code is as follows...

G0 X-2.120 Z1.0 T9;
G96 S350;
Z .1;
G1 Z-.0105 F.01;
X-3.05 F.005;
Z.01;
M05;
G0 X2.880 M04 S900;

Well, it wasn't doing exactly what I said...

When I tried to create a .030" corner radius with .030" nose radius tool, it was doing the "loop" as described above. But when I also try to create...

OK... so what if the radius is a positive value and still goes the long way.

I am trying to program a lathe cutting the face and OD with a blended corner radius. I'm using G2/G3 and I have figured out my end point in CAD but the cutter is taking the long way around the...

I need help finding a training class or seminar for general turning. I recently switched engineering roles from new product development to machine room engineer because I enjoy being "hands-on". I...