Search:

Below is what I got for a post. So looks like it's in order, now will the cutter comp work only on the X moves or on both the X and Y? There are three types of cutter comp Control, Wear and Reverse...

Hi Guys,

I'm trying to figure out types of cutter compensation and if they are enabled on the NC. I have a Kitamura Mycenter 1 with Fanuc OMC 6 controls. My first question is how would one know if...

Hi Guys, HuFlungDung and LeeWay
Thanks for all your replies and time,

The slops will be milled with a chamfer mill. Hum sounds like this will work it's somewhat similar to what the gentleman...

Hi Guys, HuFlungDung and LeeWay
Thanks for all your replies and time,

The slops will be milled with a chamfer mill. Hum sounds like this will work it's somewhat similar to what the gentleman...

I posted a reply on the worg thread.

Hi RRL,
Yeah, I had T1 called up so when I pushed the machine alarm button it displayed 01. 01 happens to be the machine alarm code for low waylube. Stupid me lol.

Thanks for the reply.

Hi,
I'm using a Kitamura Mycenter 1 with funuc omc 6 controls. The machine allarm is flashing but when I push the alarm button nothing displays in the toolpot number display. Also the machine is...

Hi HuFlungDung,

Here are a couple of new pictures. Should be able to see detail better.
Thanks,
Eric

Hi Guys,
I have a Kitamura Mycenter 1 with Funuc OMC-6 controls and using MasterCam X2 would any one have a post?

Hi HuFlungDung,
Hummmm, thought about that but haven't tried it yet. I'll attach a thumbnail of the part to the thread. The biggest thing is once I mill the bottom and flip/rotate it the only area...

Hi LeeWay,

That’s an option for sure. I have been thinking about buying a bunch of stock and machine my own vise jaws fixtures exedra. Ok dumb question, would you mill all the first OP cuts then...

Thanks for your reply,
I’ve tried that two problems that developed 1, the parts are joined by .100 and the length of stock the martial bends and flexes. 2, Also the stock tolerance is different from...

Hi Guys,

I have been tiring to make a part that is two sided but when I flip it to mill the second side the top cuts doesn’t line up with the bottom. I’ve tried many things and have been un...

Hi got the parameters, 1983... isn't a complete email address nor did I receive a private email to send the file.

Hi Getting ready to start up the machine what's your email? Mine is [email protected]

Hi,

Sure I can get you a copy. It will be either Monday or Tuesday. Just want to fore warn that my Z axis multiplier is set different from stock. Someone changed the encoder and put one for 10mm...

I just built a cable today it works perfect. I have a 92 Mycenter1 with Fanuc OMC – 6 the pinots below should work on yours as well.
Here is what I used
25 Pin DSub 9 Pin DSub
Pin...

Hi,

Lucky for me the machine had no blown fuses.

Allot of this the machine sub systems are tided in emergency stop circuit like you said. Like when the contactor circuit breaker trips the...

Hi Guys,
It's been a while and there were people wondering what the outcome would be.
Hi

"Also, phase (3) and rotation (CW) are very important as you stated. I would just like to add that...

Hi Everyone,
I have a Kitamura Mycenter 1 with Fanuc OMC controls. Would anyone have a manual and a post for Master Cam X2 as well. I'm new to the CNC machining the manual would be a huge asset as...

The machine is on the 2lds and man abs led are on still nothing will happen the tool change index light is flashing fuse seen to be ok

Hi,

I'll be heading the shop shorty and will look into what you had mentioned. The controls are Funuc OM not sure if that is the type then there should be a version like "3"?

Would anyone have a post processor for 1997 Kitamura Mycenter 1 with 4th axis running Funuc OM controls?

Thanks In Advance,
Eric

Hi,
I'm 90% sure the air is leaking from the bottom of the spindle or rather this is where the leak is most noticeable. Just to add to the air leak, the inline oiler reservoir was missing a gasket/O...

Need some help Please,

Hi Everyone,

My name is Eric and just joined this forum and got a little lost on where to post this thread. I just purchased a used 97 Kitamura Mycenter 1 with 4th axis....

Hi,

Thanks for the reply. While the machine was off I pressed the emergency button in then turned it clockwise to release it to it's out position.

Need some help Please,

Hi Everyone,

My name is Eric and just joined this forum. I just purchased a used 97 Kitamura Mycenter 1 with 4th axis. I bought the machine from PM Machines in sunny...