That's called a "Colombo" in the trade its 2HP 300Hz. I use a Siemens micromaster on my Chinese 2.2HP spindle runs like clockwork as long as you get a drive that is more than 2HP and capable of 300HZ...
Type: Posts; User: Stuboy
That's called a "Colombo" in the trade its 2HP 300Hz. I use a Siemens micromaster on my Chinese 2.2HP spindle runs like clockwork as long as you get a drive that is more than 2HP and capable of 300HZ...
You should cut MDF just about as fast as your machine will go in X & Y! If you look at any commercial chart for bits most have a MINIMUM speed of 5500mm/minute! (up to about Now my machine will only...
I'm in London looking for a machine to engrave our aluminium faceplates, the engraving needs to be about 0.3mm deep and is from a DXF file, the units are 110mm x 110mm. Looking around I think a...
Yes 240v should be no problem for a 220v machine.
In europe the rules are for central europe 220v + (I think its) 14% and in the uk its 240v -14%.
UK uses 240v, europe uses 220v, so the european...
Did you get this baby going? We have a system 48 bed that we have modernised, its pretty good.
Regards
Stuart
Hi Guys (and girls?)
Am all shiny and new here and looking for a machine that can cut 4'x4' (1220x1220mm) MDF sheet.
Would be interested in something second hand.
...