Search:

Thanks that is extremely helpful

I received my mesa cards yesterday, I will probably be installing them this week, I am going for a 5i25 + 7i77 + 7i74 and on the 7i74: 7i70 + 2x7i71 + 7i73 + 7i83...

Thanks for that,

unfortunately the color codes do not match real life for me, and the type of encoder is slightly different mine has no 0 at the end,
the picture of the connections is for the...

Hi,

Seems like you have some advantage over me :) I do not have a working controller, nor do I have stickers on the encoders so I don't know what cable does what, but you are right, they do seem...

the machine is from 1991, and uses GEC ALSTHOM drives from PARVEX type CMS2 attached is a photo, to my knowledge all 342 machines uses these types of drives, the 346 machines have other drives and...

I am also going to use Linuxcnc with Mesa cards, on my machine the servo drives get feedback from the motors via hall effect, and the hohner encoder on the motors goes directly to the controller it...

Hi, I got the same machine, a Biesse rover 342, but the controller was broken, it never ran in my shop, so I 'm in the process of retrofitting (taking it apart and seeing what we have to deal with)....

Hello all,

Just wanted to introduce myself and the project i am about to undertake (or not).

I have been reading this forum a lot, and also did quite some researching on the internet for...

Hi all,

This is my first post here, thought it was time to share my project with you and maybe get some help.

about 2 years ago I bought a new conventional mill, soon after that I decided to...