The battery went dead on our old mill with om control. I cleared the control and reloaded all parameters and diagnostics (we had these backed up)
Everything appears to be working fine except I...
Type: Posts; User: rgrow1
The battery went dead on our old mill with om control. I cleared the control and reloaded all parameters and diagnostics (we had these backed up)
Everything appears to be working fine except I...
An operator decided to change the membrane on the controller while the machine was off, when powered up, alarms 417, 427 and 100 came up.
Long story short, it was a knock-off part that held buttons...
An operator decided to change the membrane on the controller while the machine was off, when powered up, alarms 417, 427 and 100 came up.
Long story short, it was a knock-off part that held buttons...
I know everyone is going to have their opinions here, but I am trying to find a cam software that really shines on lathe applications.
We us MasterCam for mills, which runs well, but their lathe...
We did get it resolved but it has been so long that I don't recall what the fix was.
I'm having trouble with communicating through the RS232 port. I am able to send from the machine to the computer, but not from computer to machine. We did lose all parameters on this machine and had...
18 I control "The tool and rev. spindle condition alarm. Check confirmation switch in tool post unit"
We have a Daewoo 300LM that we are getting this alarm on intermittently. We changed out the turret confirmation prox switch but it didn't go away. We power down and reset, it will run for days...
Turns out all you really need to do is get to the right people to get a problem solved.
Thanks Darryl Hart with Doosan and Dave cooper with CNC Machine Servise!!!!
A little guidance and help from...
I put a G4 X30. in 9001 and it did not read it, it went right to alarm.
6071 is set at 6.
If I input "T1 M6" I get 078 alarm, number not found.
Interesting, I have 21 Daewoo/Dooson machines, but have never been told that there is factory assistance available.
The dealer I'm dealing with has never mentioned that option.
With 21 of your...
I have a Daewoo DMV 650 with an 18M control. I had an operator that didn't know what he was doing get into the parameters and then deleted all my tool change macro's. I'm not sure why the 8000-9000...
I have a Daewoo DMV 650 with an 18M control. I had an operator that didn't know what he was doing get into the parameters and then deleted all my tool change macro's. I'm not sure why the 8000-9000...
I'm looking for a very basic verification program that will read g code programs, something similar to the graphics on Fanuc controllers. This is mostly for lathe and would be great if it threw up...