Search:

BRIDGEPORT I MK2
CONTROL TNC 151A HEIDENHAIN

[email protected]
Thank you

READY

GEAST1967
TWO TO ALL
COULD YOU HELP ME WITH THE STEPS YOU FOLLOWED TO REACH YOUR SUCCESS
I WANT TO DO THE SAME ON MY LATHE THANK YOU AND I HAVE THE FAPT LADDER II SOFTWARE ON WINDOWS 98
THANK YOU

Te esta marcando que tu spindle drive tiene problemas

En la puerta tracera esta el control del spindle revisa las alarmas que marca el displey, Con la mano rota el spindle y verifica si los...

cnc2149 were right to change the parameter 0001.0 = 01,101,001, case solved

I can not explain me how can work properly?

:banana:

Thanks to all

Parameter 0001=01101000

This parameter is the same as when the lathe work properly

The x-axis does the same but with half an inch

You think you need to change the parameter?

Thanks for...

Thanks for your reply

MDI programmed in G23 and appeared alarm 1

The operator's manual tells me that G22 is normal when you turn the control

:confused:

Hello everyone and thanks for your time.

I have a lathe Hardinge and worked perfectly until the day yesterday

I have the screen in position and put it in MDI G0 z-40.000mm and the travel is 4....

thank you for their answer
I will get the parts to tests
if person has some other opinion?
Rommel.

http://i282.photobucket.com/albums/kk241/dragonbikes/nakamura.jpg

Controller will not power up, therefore no CRT display. Power supply is on with no alarms, but on the main board LED's the top row is green in all 4 banks with 1 red light in the second bank of the...

I HAVE THE SAME PROBLEM IN ONE LAHTE NAKAMURA-TOME-20II.
MY CONTROL IS FANUC 18TA.
I HAVE OTHER MANUALS AND PARAMETER OF THIS MACHINE.
INCLUDE SPECIAL PARAMETER.
IF SOMEBODY THIS INTERESTED IN...

DAN
I WORK THIS DAY IN MI MACHINE,ALREADY CHECK THE POINTS THAT YOU INDICATED ME.
CONTROL TYPE 120B-0027-B006
DATE 1979-05
DISCONNECT THE CARDS OF THE SLOT # 8 AND #9 TO CLEAN THEM...

TEL 2487 9933 Y 3537 5302
ATENCO NO 10
COL LA ROMANA
TLALNEPANTLA EDO MEX

Hello
I HAVE A MATSUURA UV710 VMC WITH CONTROL FANUC 3000 C
I DONT HAVE EXPERIENCE FOR USED THIS CONTROL. IN THE CONTROL MARK THE NUMBER 30721.ALSO IN MANUAL CONTROL ANY AXIS DOESN´T MOVE...

Hola a todos
Tengo un problema para usar el control Fanuc 3000 c instalado en una fresadora Matsuura UV 710
no se mueve en control manual y no se como se leen las alarmas no estoy familiarizado con...

Gracias
el eje de X estaba muy pasado de limite

Thanks
the axis of X was very last of limits

Thank you for your reply
I will work in this part. I inform you
Rommel

Me llamo Rommel Rojas y vivo en la CD. de Mexico
tengo partes de control 6m y tengo una maquina con este control
me gustaria ponerme en contacto contigo por tel para saber mas de tu problema tel 55...

Hello I have one machine mark Stama with a control Fanuc 0 Maté.
when I start maquine me it indicates an alarm 1003 not aus (x21.4). never and position in march one of these machine and I don't...

HI MY NAME IS ROMMEL.
I HAVE A MACHINE URAWA UB 710 YEAR 1981.
IS IN GOOD CONDITIONE AND NEED THE MANUAL FOR FUTURE PROBLEMS AND TO GIVE MAINTENANCE IT MACHINE.
I BUY EVERYTHING INFORMATION....

With to your disinterested help.
now my machine this working perfectly.
alone I put the key that you gave me and ready
you are a professional Man.
Thank you Neal
Rommel Rojas...

HI, THANK YOU FOR INTERESTED IN MY PROBLEM

IN THE SCREEN I HAVE LOCKED CONFIGURATION MACHINE.
AND SAY PLEASE ENTER ACCESS CODE.
PLEASE SEND ME YOUR E-MAIL ADDRESS, IS MORE EASY FOR MI BECAUSE...

recorte

Hello
My name is Rommel Rojas

I have 4020 and I need to change the parameter "SCREW "of third page
but the cursor doesn't take position in that line, I think that has lock
somebody has...

Hola alfonso apenas hoy lei tu mensaje y me pregunto si resolviste el problema con tu maquina yo tengo algunos manuales.
Rommel Rojas