Search:

I purchased these parts for a CNC project and didn't end up using them. Parts included in this listing:

DG4S-16035 (retail $160)
C82 Multi function breakout board with C78 Connection board...

Phil,

I'm not an expert in retrofitting machines but I have rebuilt a couple machines in my shop.

A couple things you'll need to know:

- - - Updated - - -

Phil,

Nice work.

Ryan,

I'm not sure why you'd be getting chatter but I think you may be right in considering the spindle bearings. I have two of these machines and one has head vibration at higher rpms. I suspect...

Thanks for the info. I'm getting an error from the machine about the tool change position. I'm considering buying a Centroid Oak board to bring everything up to date. I managed to find a manual for...

I have a Sharnoa VMC with Tiger 7 control. I use Fusion 360 for cad/cam work and need a post processor.

I haven't been able to find one and am wondering who to contact to have a custom post made?

I picked up a Sharnoa HPM 30 with tiger 7 control and the manuals with the machine turned out not to be the manuals for the machine. It powers up but I can't figure out the homing procedure. Any help...

Picked up a Sharnoa hpm-30. Turns out the manuals with the machine aren't actually for the machine. Tiger 7 Control.

Anybody have one they'd like to share or sell?

Info on the machines:

Machine One-
Partner 1 Series H
Serial 3186
Manufacture Date 537
Centurion 5 Control

Machine Two-
Partner 1 Series G

Hi,

I am at a loss here as to what my problem is.

I had my machine running fine up until a few days ago. I moved some of the components into a second cabinet due to noise issues through my USB....

I recently had a ROM issue with my 6T controller. Fanuc couldn't help me and the machine builder wanted more than I paid for the machine to burn a couple new EPROMS.

I plan to retrofit a new...

I think I have the 15hp spindle motor in my machine. I have an extra 10hp motor in the shop so I think I'll swap them out in order to avoid buying a new vfd. Waiting on a couple parts...looking...

Thanks Jim!

I have a Delta VFD-B

The forklift is a Clark. It's impressive, rated for 5,000 but will happily lift 7,500. Any more than that and I need someone acting as my counterweight.

Would they be able to write the Daewoo software? That's the problem, the bad EPROM was programmed by the mach maker.

I took some time today to start pulling apart the machine.

It looks like the spindle motor is a regular motor, not a servo? I don't know for sure but it looks like pretty standard wiring. Motor...

Well, finally heard back from Doosan...something about not being able to supply new EPROM. For a mere $8,500 they will come take a look at my machine.


I won't be taking them up on the offer....

Thanks Jim.

I've read a bit about the macros for tool changes in Mach3. Their website is currently having some problems so I can't do forum searches to read topics directly related to macros and...

I recently purchased a Daewoo Puma 6 that has a Fanuc 6T controller. It was working well until a week ago when one of the EPROMS on the board went out. Fanuc said it is a machine manufacturer issue,...

Purchased an Emco Turn 120 with TM02 a couple months ago and have been slowly trying to get it up and running. Bought a rotary phase converter 20hp with a CNC grade box, machine still won't function...