584,817 active members*
5,140 visitors online*
Register for free
Login

Search:

Type: Posts; User: raindancer2204

Search: Search took 0.00 seconds.

  1. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hi,

    i ordert now the following "3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog for PLC 15-30VDC" on Amazon looks like the same from Ebay:
    ...
  2. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hi akihiko,

    my goal is to use my spindle speed control and turning the spindle on and off with the CNC program with the JP-3163B.

    You say that these 2 functions worked for you? correct? on your...
  3. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hi Mactec54,

    it seems that he has the same setup of the hardware as me when you look at the link here: https://www.cnczone.com/forums/spindles-vfd/405148-cnc-software.html#post2386286

    What do...
  4. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hi akihiko,

    you have the same main board as me? the JP-3163B. Do you also have the same frequency inverter of the type: MK100-2S1.5G-DK?

    Can you please take a picture of the jumpers on the...
  5. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hello,

    From today:
    when turning on the main switch on the housing, I always have about 9 to 10 volts on the mainboard pin for the spindle control.
    If I increase the number of revolutions of the...
  6. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hello,

    when turning on the main switch on the housing, I always have about 9 to 10 volts on the mainboard pin for the spindle control. If I increase the number of revolutions of the spindle via...
  7. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hi Mactec54,

    i have set the bridge between SEL and 24 volts again.

    Result:
    It works now.

    But there is one more problem:
    The voltage at the frequency converter is always around 10 volts...
  8. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hi here i found a better Manual via Google:...
  9. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hello Mactec54,

    excuse the late answer. I have now measured the voltage with the measuring device. Also through the CNC program
    the volt value changes.

    The jumper is also set to volts.

    I...
  10. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hello Mactec54,

    if I understand the right thing, I definitely need a PWM to analog adapter between the Mainboard JP-3163B, which is then switched to the frequency inverter.
    Is this correct?
    ...
  11. Re: my new CNC SXCNC-3 Axis 6040Z. Spindle setup to VFD

    Hi.

    did you start the frequency inverter with the PC? Did you do that with the wiring? I have opened a thread for this to help others as well.
    ...
  12. Replies
    8
    Views
    4,113

    Re: VFD manual for MK100-2S2.2G-DK

    Hi,

    i have a question for the frequency inverter MK100-2S1.5G-DK. I want to start my Spindle via CNC Software. My CNC6040 is from the Vendor "SXCNC".
    Has anyone ever wired the frequency inverter...
  13. CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hello

    i'm new here in the forum bought a used China CNC6040 from the vendor: "SXCNC" milling machine with 4 axis.

    In this the mainboard of the type JP-3163B is installed with an additional...
Results 1 to 13 of 13