Strictly building your own Spin Casting Machines.
Need Help?
Need Specific Information?
Need Photos?
Need Diagram & Prints?
Wanted
Anyone that has Built there own Spin Casting Machine,...
Type: Posts; User: DougWoz
Strictly building your own Spin Casting Machines.
Need Help?
Need Specific Information?
Need Photos?
Need Diagram & Prints?
Wanted
Anyone that has Built there own Spin Casting Machine,...
You can buy American Ball-screws From McMasters.com
Or if you want good Ball-screws, Cheap Price Try this guy in China
I have Bought over $3000.00 worth of Ball-screws from him, but you will have...
My Home work shop dubs as a Business and Hobby Shop.
This is my Metal Work shop.
This is a Elox wire EDM...
Here is a DXF from aspire. it has not been manipulated to your needs but it is vector format.
I have not replaced the pump on ours but we just gutted a series N Elox and there were 2 pumps on that. Those and the one on our series O use a 200v Pump. Have no Idea where to get one. Saving ours...
I have two types of posts one is for Mastercam, and the other one is from aspire or PhotoVcarve, Cut3d.
You may want to just get Cut3d. They have about 40 posts in there software package. you can...
That may be true, and especially for a flusher 0.1 inches a minute. and that's with a new machine. But with the modification we made on the lower head, which keeps the lower head cover & saturated...
Fanuc can only write chips that are viable (and only in Chicago). 988 error means that the ladder program is corrupt. I have the same problem on a Bridgeport Fanuc OM control and I have to go back to...
Do you know if there is any way to get hold of a set of Eproms E01 & E02. for a Interact 720. Merory Board A16B-1212-0210 [E01 (DEC 89 INT 720F PMC-L P.72M)] [E02(DEC 89 INT 720 OMNTC MF P.72M)]...
According to Fanuc CNC America, They are not able to download the ladder program from the older machines, (example: 0M controls 1986 but they can copy the Eprom if your willing to send it to...
Ours Is the OM model Fanuc Elox. but it should be the same as yours. from the pictures and the control console it looks like a OM.
It looks like a Fanuc Wire Cut. There were three companies that I know of that used the same configuration. Elox, Pratt-and-Whitney, & Fanuc.
It looks as if it has been well used. I bet the reason...
The parameters should be 310 to 313
310 = 110010
311 = 011001
312 = 011001
The parameters should be set at the PC with these parameters
4800 Baud
2 Stop Bits
Download This Web Page. and all of the links should work if not let me know.
I will try to add some more of the older links later, and up date the new ones as they come available.
Thanks to...
[QUOTE=Gnome;715182]Wow... well i guess that's one way to rebuild a spindle but i definitely wouldn't recommend it. How did you preload your a/c bearings?
If you read through the bearing design...
Ted,
It sounds as if your one step ahead. what you need to do is find out what the EDM Parameters are set for communications. (I will get the block numbers for our machine) and they should be...
Doug,
There is a 232 port on the front of the machine. The cable I need help with is the one from our computer to the fanuc. We have one but are not sure how it should be wired and think it could be...
Here is a rather cute Engraving that I created From a picture that i found on the internet. It looks like a monkey rat. I think you all will like it. I have up loaded a Bitmap, DXF, and Gcode file....
I'm not here to argue with you, and you are absolutely right about one thing a good spindle shop is the way to go. But that would have cost me over $3000.00 dollars. on a CNC Milling Center from...
What I need is the Ladder Logic that's only supplied by Bridgeport. It is contained on the two Eprom chips in the rear of the machine on the Memory Board. We had a Chip Failure EO1 Eprom. This...
As I stated The Machine Repairmen I had talked to and the one I had help me repair this spindle says Spindle oil These are Master Repairmen with 30+ years experience. Besides if your claim was...
I need a little more information. post a picture on this site of the machine. and what manufacture and series is the machine. Elox Fanuc went from N all the way T ect. You can privately email the...
I believe the Aspire software can import .art and then export it. I know for a fact you can bring in a bitmap blot out certain areas and then trace it.
I bought a Bridgeport Interact 720 O-Mate, that had bad spindle bearings. We rebuilt the whole assembly and replaced the seals and Bearings.
1. First the spindle has what is called a tri-set of...
what type cad are you using if it is Master Cam then we may be able to make some type of deal. I require some information if you have the same type of machine I have.
I think we can make a trade. I need the ladder information from eo1 and eo2 Eprom chips. this will not cost you a cent. but if i get the information i need i will more than be happy and provide all...