NHP 5000 if possible. Thanks
Sent from my SM-G965U using Tapatalk
Type: Posts; User: ktmktmman
NHP 5000 if possible. Thanks
Sent from my SM-G965U using Tapatalk
I dont have a Mori NT but I have done something similar on a DMG CTX gamma. This machine has Siemens so the code wouldn't be comparable. Its using Tool center point control. Moving X,Z and B at the...
No problem! I used that trick to help fine tune my post processor. If your having problems with a CYCLE call compare the parameters before you send it to the machine and after the control fixes any...
I'll have to look at it tomorrow when I get to work. Also have you tried re-compiling the mcall cycle84 line? Basically you put your cursor on the same line and either arrow to the right or hit the...
Does your pitch/ lead match the tap in the tool library? Are you using shop mill or din-iso code? Attach your code if you could
Sent from my SM-G965U using Tapatalk
I have a CTX gamma 2000 tc. It looks like you have a tool chain magazine. We only have the revolver with 36 tools so I'm not familiar with the chain type. I would hit the button on the panel that...
What dmg model is it? Beta or gamma?
Sent from my SM-G965U using Tapatalk
I should probably retract my statement slightly. I have been programming and setting up many different machines for the last 15 years and my personal favorite to work with is the Siemens 840D for...
Look into a doosan with a Siemens 828 control. Much better than haas or fanuc controls.
Sent from my SM-G965U using Tapatalk
We use this in our DMG machines with no issues of sliming up:
https://www.creativecnc.net/store.html#!/CNC7048-BASF-Licensed-G48-Glysantin-Repl-Coolant-Pre-Mixed-10-L/p/90998375/category=28169666...
We have 6 A2100 machines and I believe we have had that issue a few times. We still send our boards and drives to Siemens to get an exchange or fix what's wrong.
Sent from my SM-N910V using...
I would call support. A technician should help you over the phone. Phone support is free in the US for all dmg mori products.
Sent from my SM-N910V using Tapatalk
Look into cimco NC base.
Sent from my SM-N910V using Tapatalk
I'm not familiar with the fanuc control but I would assume that you need to adjust the wear for the tool diameter instead of wear for the X axis?
Sent from my SM-N910V using Tapatalk
I would start will a call to DMG tech support since it's free. I would also call renishaw and see if they can help. I know they make special macro programs for Siemens that might get what you need....
Looks like your on the right track. I would also look into CYCLE832 to assist you in smoothing out multi axis tool paths.
...
Thanks! I was using TRANS_5A(4,"B") Function for the 5 axis work. Which I believe is the same thing as TRAORI just DMG doing something a little different because this is a mill turn platform. I...
Yeah we have had similar problems with our field service with DMG. We have pretty good phone support here in the US but we have chosen to get our service work from someone other than DMG corporation....
Our machine has only the milling head (Z1) and a steady rest (Z2). Our machine is a 2008 model which we were told was the first year of the CTX gamma machines that replaced the GMX line. I believe...
Thanks for the info! That works great! I see you do not use the Gildemister program structure for you programming format. What software do you use? Do you like the Beta? Sorry for all the questions...
Yes that would be great if you could. The only code I know for that is a L726 ;Sync Spindles Phased..How is your support from the manufacture as far as technical support? Here in the US the...
Any luck with this problem? I have been running a CTX Gamma 2000 TC and would love to hear if you found a solution to your problem. We do not use shop turn very often (mostly for boring jaws) we use...
Yeah I contacted my local reseller and they gave me the "kit" from Siemens for my machine that incudes the post and the simulation. So far I have gone through a couple of the tutorials that come...
Any one familiar with programming a Gildemeister/DMG CTX gamma or GMX lathe?
Did you get your issue resolved?
I been a CAMWorks user for the last 8 years and right now I'm going through a 30 day NX cam trial. I love CAMWorks for the machines that we currently have but we just recently purchased a 5 axis mill...
#1...push the "align" button on the pendent and push the "more" button till you find mechanism align and push that soft key to align the tool mag.
#2... use MDI and call in a tool to the spindle...
CELOS is standard now so it would probably be more expensive to get a new machine without the new CELOS control.
We bought a NLX2500SY / 700 last year for around 180K. We liked it so much we bought another one this year but slightly larger NLX3000Y / 1250 for around 220K. We plan on replacing all of our older...
Hey no problem I was in your spot at on time. Yeah that is frustrating I have that same problem with the different types of the "same" style of features... as for your last question. It looks like...