Search:

Could be a bad jewel or any of the components not aligned properly. I used to have this problem when using sapphire jewels but hasn't occurs in 3+ years after moving to diamond.

As far as the...

I use 3mm or 5mm depending on the thickness and shape of the parts

If you're using the liquid tanks I would check the pressure on them. Sometimes when a new liquid tank is delivered the pressure is too low to cut and we have to turn the pressure builder knob to...

Hello,

We have a Trump Trumatic 3030 laser and a Trump Trulaser 5030.

The 3030 is Bosch controlled and the 5030 is Siemens controlled.

On the 5030 I can set up a production plan and run...

Cutting problems are usually gas pressure, power, or focus.

If it's happening in the middle of a straight line cut (no turns) I would check first the lens quality. If all 3 other parameters are...

Hello,

I'm having trouble machining a slit in a block of steel. I have used this tool and programmed it the exact same way with an aluminum part that is very similar with great success. Now I...

I've had a Maxiem 1530 for about 6 years. I used it daily until about 2 years ago and now it gets used about 1-2 times a week (upgraded lasers so most of my cutting is on those). It has a direct...

Thanks for your input! I had a repair guy come out and he found a board that was burnt up. I'll post up if it works in case this happens to future members.

Here is another view of this problem.

https://youtu.be/Jv-Rgwqotig

Sometimes it goes half way then retracts, sometimes it doesn't move at all before throwing the error, and others it goes...

Hello,

I recently purchase a 2011 reman VMC4020 and I'm having issues with our ATC.

This is a video of what it does when I use the M6T# command
https://youtu.be/xyZvUEmKyC8

Any ideas? I...

Hello,

I have XR6 express and I have a question. I am new to CNC milling (I've been messing with XR6 for about 3 days total) but have been programming lasers for almost 12 years and a waterjet...

Hello all.

I've been programming and running lasers since 2004 and a waterjet since 2010. I use Radan for our Trumpf lasers, Haco CAD/CAM for our Haco laser, and Inteli-Max for our Maxiem...