I am running A286 hardened .50 inch diamter material and im cutting 1 inch long blanks using Iscar IC908 cut off insert. I am only getting about 100 cycles before it wears. I know this stuff is hard...
Type: Posts; User: usalbeash
I am running A286 hardened .50 inch diamter material and im cutting 1 inch long blanks using Iscar IC908 cut off insert. I am only getting about 100 cycles before it wears. I know this stuff is hard...
Well Roger you are right in the fact that it did not like G97. Any idea on what I could use either in programming or if there is a bit in the parameters that I could use to keep a production count?
I run 2 CNC lathes with Fanuc controls. However, I tried simply adding G97 to the end of the program but my mill stops at G97, G99 would be after it but I never make it there. On my other Fanucs I...
Rcs60, thank you for your help! That worked and if I have any questions in the future I hope it's ok to look you up. Thank again.
I will surely try this Monday Morning. Once again I thank you for your help
First let me say thank you for taking the time to help me. I am including a picture of the part and the cut off tool im attempting this radius with. The first radius on the front of the part is a...
I am using a tsugami S25 lathe to make a 2" long Dowel Pin. I am using material that is .505 in dia. and I have the radius on the front programed and its working fine. I am not turning down the Dia...