Search:

Yeah thats the one....in my case i just soldered the wires directly.... anyhow that was then and i no longer have that controller... ended up geting a Gecko 540 and a smooth stepper ethernet card.

Thanks for the information. The jtechphotonics site has a lot of good info... will research more on this ... I will want to also upgrade my controller too to the Gecko G540 controller too

I have a 6040 and the unit/per is calibrated at 320 for X and Y axes in mach3

Hi wmgeorge, Thank you for the info....that gerbil software looks interesting ... I have a 2560 mega Kit card that I could use for it but I ready that it has to have the atmega 328 microchip.. I...

Hi everyone,

I got me one of those ebay lasers (15w) and I’m trying to adapt it to my chinese 6040 machine... So I cut an aluminum 1/8” plate and drilled it to fit it on the spindle as you see in...

Hi everyone,

I got me one of those ebay lasers (15w) and I’m trying to adapt it to my chinese 6040 machine... So I cut an aluminum 1/8” plate and drilled it to fit it on the spindle as you se in...

Thanks man.. That's awesome.. im working on it now :). One more question... do you know where on the board the probe wire gets connected?

Also did they give you a higher resolution image by any chance ? I can't see this image to well

yes that's the same one I have as per pic below.. This is awesome!!!! Thank You

344686

Nice man!!! Thank You for the images... This deff helps... I will look tonight when I get home from work at the parallel port board and take it out to take some pics and post them tonight

Hi,

Here are some pictures of the board:

http://www.cnczone.com/forums/attachment.php?attachmentid=344550&stc=1

http://www.cnczone.com/forums/attachment.php?attachmentid=344552&stc=1...

Greetings everyone and Happy Holidays!!

So I bough this and I got it to work with the parallel port pc etc. I can control it with mach3 ...didnt figure out the spindle control yet so Im using...

Hello from Palatine, IL ... noob here to CNC routers :)