I need help on the wiring and operation of an Index Pulser. It is a Sumtak Corp .Type E. I. P. 11286 24VDC 100rpm.
It has a total of 12 wires
1.BLUE
2.GREEN
3. YELLOW
4.ORANGE
5.RED...
Type: Posts; User: john robin
I need help on the wiring and operation of an Index Pulser. It is a Sumtak Corp .Type E. I. P. 11286 24VDC 100rpm.
It has a total of 12 wires
1.BLUE
2.GREEN
3. YELLOW
4.ORANGE
5.RED...
Are the step2 linear still for sale?
JOHN
Thanks Guys for the information
JR
Thanks Guys for the information
JR
Hi Hoss
Like that Rostock printer. Do you have any plans for building that printer? If so can they be obtain on the internet? One last question what kind of software is being use to drive the...
My Bad-sorry about that Tony.
Thanks Rob never would have thought about that seems like a good idea. Will try that Thanks again.
JR
Thanks Rob for the information. My Dell 1545 share memory with the processor and the on broad video card which Bobcad tech said this is a no no. Min of 1gig for graphic card. I am in the process of...
Anyone running v25 Bodcad on a 64 bit laptop. Need some help on obtaining a laptop. My Dell 1545 crashes every time I run the simulation portion of V25.
Any suggestions would be appreciated.
JR
OKAY about your Dell. I ran V24 on my laptop dell 1545 until I ungraded to v25. Every other function seems to work even simulation but when you exit thats when I have a problem that is with win 7. I...
Anyone running V25 on a laptop? I have a Dell Inspiron 1545 and it will crash when exiting simulation modules. I was told you need a video card with its own memory. Need a list of laptops that would...
If you download the lastest mach post for v24 you should have all the changes
(mach3-mill-no-atc_rev2). I tried the changes posted above it will not work because there is no 3XVMILL.MCH file listed...
Current protection circuit set for 16amps and mounted to an aluminum chassis with a muffin pan blowing on them.
Why would a drive rated at 20 amps at 100v burn up with only 60vdc at 16amps or less?
You seem to be missing the z axles assembly that fits over the long draw bar. It contains the electrocraft servo motor with the separate encoder drive and limit switches.
John
I have one just like it. Hurco electronics Bridgeport mill series 1. I am in the process of converting my to Mach3 with rutex drives.
John
GOOD JOB RWW. YES YOU LEARN BY DOING.
JR
Using Gecko g201 on x,y &z axis for six years now never a problem on my Series one.
JR
GOOD NEAT DESIGN LIKE YOUR WORK JV. MADE A TABLE SOMEWHAT LIKE YOURS.
BobCad call me for an upgrade to v22 I told them I willl have to think about it. The next day they called my home seven times (only one message ).
JR
Thanks John really simpe fix. Have not been working with Lc long mostly use Bobcadcam. One quick question about sheet cam can you nest in that program?
John
I am using lazy cam to create my tool path from a dxf file from Bobcam. My z is always coming out on 60 before plasma torch on (m03). Does anyone have any ideas? I am using Lazy Cam in the plasma...
Thanks alot Gerry for the fix. Everything is fine now.
John
I am using Mach3 plasma for my plasma table and Mach 3 mill program for my mill. I cannot enter the g-code edit when using the plasma program but can enter using the mach3 for the mill. Any...
Thanks for the information. Not living in Florida anymore. Retired move to Arizona. No business just playing with my machines (converted series one bridgeport mill ,cnc-Ikegai and many manual...
Trying To Locate An Inexpensive Outlet For Rack & Pinion Supplies. I Am Constructing A 5 X 8 Plasma Table.
Thanks -jr
I Always Use An End Mill Holder When Using A End Mill. It Seems Do Hold Without Every Getting Loose.
John