Hello , I just start having an issue with my MX4660, I have 3 push buttons connected to input 1, 2 and 3 fot cycle start, feed hold and stop cycle, +12v connected to OPTO1. They were working right...
Type: Posts; User: karloterrazas
Hello , I just start having an issue with my MX4660, I have 3 push buttons connected to input 1, 2 and 3 fot cycle start, feed hold and stop cycle, +12v connected to OPTO1. They were working right...
thanks for the pic. do you have the accessories listed on this pic?
468962
Thanks, I will wait for them.
Could you post some pics? Regards!
How About the precision?? Can it hold +0.000 ,- 0.001in on a 0.75in OD shaft along a 7in lenght bar using the tailstock? I have the 15L but im limited by the lack of the tailstock in some...
Thanks for the Info, im planing to buy the turret and I already have the long plate with gang blocks and still want to use the QCTP for extra tools.
Do you still have your tailstock?
Is there a way to use the CXA QCTP and the long gang plate? to move the QCTP to diferent postions along the T slots of the long gang plate?
Is there a way to use the CXA QCTP and the long gang plate? to move the QCTP to diferent postions along the T slots of the long gang plate?
I agree with you, i had to quote 1000 delrin pins, it uses 4 tools and the only way to win the job is to make the part in less than a minute, open and close, loosen and tighten, it´s against wining...
the point that you can change from collet to chuck, easy and quick got my attention, not needed to worry about the draw tube anymore or adapters. The only drawback is that i have never seen one atlas...
Im planing to buy an atlas collet closer, how does yours work along this time?
where is the INI file in order to change the STEPS PER INCHES for every axis XYZ.
I want to tweak it sigly in order to measure the accuracy gain.
I always make this test to my custom made CNC...
I´m really new to UCCNC, so far its been working great.
I Would like to add an ATC to my setup, but i dont really know where to start, currently i´m using the UC300 WITH the UB1 breakout and the...
Hello GER.
Today my relay fail and my contactor never turn on.
Does the frequency of the charge pump signal has something to do with this? is it better to use a solid state relay for this...
I was having the same questions with my UB1...currently i have a contactor with a manual switch connected to the coil circuit to enable o disable the power to the drivers.
How can i connect the...
I really appreciate your help.
thanks a lot, now everything its more clear.
Thank you very much for the recommendation, i was looking in amazon for the 24v relay and i found this: https://www.amazon.com/gp/product/B06XXC5M23/ref=ox_sc_act_title_1?smid=A1OB26G8TSLEZQ&psc=1
...
So you have connected in series your Estop and the charge pump? how do you configure that in UCCNC?? i have my estop at X103 input...
For a small reley, can i use i simple Arduino relay (it says...
I was looking for a BOB 100% compatible to use with UCCNC, I was looking for info about the PDMx-126 ( was my first choice to try...) and i came to this post.... Very nice card I will order mine...
Wow!! that update came really quickly. I just want to say Thank you so much for your help and I will try as soon as i can. :banana:
I will have to try... Currently i'm only waiting for the USB converter to arrive. Maybe this can be a future update for his plugin.
Hi Dan, I saw in your manual that the VFD must be In RTU 8N1... I just checked my VFD documentation (its a Delta VFD-M) but only says RTU 8N2, No 8N1... would that going to work??
thanks in...
Could you please tell me your most updated review about UCCNC ? I dont use the 4 axis so i dont care about that, all I do is 2.5 axis milling and some 3D carvings. Your Screen is great,I will not...
I have read all the thread looking for info about UCCNC, i´m a Mach 3 user with a ESS and mach 2010 screenset and im very happy with my currently setup, but i belive a bored with mach 3 and i want...
I have always liked the practicality of the extruded aluminum. Very easy to build machines from the ground.
My last router was inspired by the Shopbot Desktop: I wanted something to be sturdy like...
The first time i got interested in a chinese router was when i saw the OMNI Routers... so far we are not regret, its an OMNI 1530 ATC, it is very solid. The only problem I had was a defective valve...
I just finished mine.
I will add the turntable soon
362096
https://youtu.be/AKgKzSsWntw
My first succefully smoothie project:
Hotwire foam cutter "Desktop" Size
https://youtu.be/AKgKzSsWntw
362074
362076
I have just made a small size foam cutter, so far, so good. It Is powered by the Smoothieboard, it uses extruded aluminum, some 3D printered parts. Right now im trying to add a thermocouple to...