https://www.youtube.com/watch?v=22qD2AjSxpM
Type: Posts; User: kazimierzduch
https://www.youtube.com/watch?v=22qD2AjSxpM
Fourth episode is live, covering performance in variety of materials and quality of the parts. Enjoy:
https://www.youtube.com/watch?v=kj0wkk8z9Nc
Third episode is live, covering calibration/tuning and some minor upgrades:
https://www.youtube.com/watch?v=nSjGCLXO9-E
Second episode is live on YouTube, covering assembly process with lots of technical details:
https://www.youtube.com/watch?v=GCMUmYjBrmc
In case anyone would like to have a look into the techncial details of this machine, I started wrapping-up the photos and footage of the build process into some simple YouTube videos. Part 1 of my...
A show-off with a prototype Minimum Quantity Lubrication (MQL) system for small/desktop CNC engraving/milling machines that does not require an air compressor to operate. A DIY project for my DIY...
And this is how it performs. Video:
https://www.facebook.com/100004428849536/videos/1415697732547616/
As a follow-up to my former post about CNC design:
https://www.cnczone.com/forums/cnc-do-it-yourself-/424128-cnc.html#post2470836
I decided to make a smaller and chaper DIY machine. This time it...
This is how I have been spending my "lockdown afternoons" of early 2021 - advancing my CNC project!
It's an aluminium-based-construction milling machine / router with working area of 320x220x120mm...
Well, when I decided to go with this project, Mach3 was still popular here in Poland, and in fact it still is.
BTW. Personally, I'd like to have a software similar to Tormach's PathPilot, or even...
Honestly, I have never drawn the full diagram. There were only my notes taken by hand on some parts which needed to be organized before assembly.
Honestly, I have never drawn the full diagram. There were only my notes taken by hand on some parts which needed to be organized before assembly.
Hi Peter,
Thank you for your appreciation. And yes, I can help you with some guidance within the field of similar drivers. There are some things I have learned and if I were supposed to design a...
And here are the photos of the device:
http://www.cnczone.com/forums/attachment.php?attachmentid=371984&stc=1
http://www.cnczone.com/forums/attachment.php?attachmentid=371986&stc=1
...
Hello everyone! I would like to show off with my custom-made CNC controller and subject it to your criticism. It is based on Gecko G540 module and purposed for driving a 3-axis milling machine with...