My email is [email protected]
I would like to email you a photo of the spindle motor to determine if it is indeed the A1 you referred to.
Also a video of the Spindle Speed and Load %
Type: Posts; User: Kelsang-Lungta
My email is [email protected]
I would like to email you a photo of the spindle motor to determine if it is indeed the A1 you referred to.
Also a video of the Spindle Speed and Load %
Dhardt: What is the source of the 403 line temperature within diagnostics?
The actual source name and location of the temperature probe for this 403 line of information.
Attached is a photo of...
Huh?
But my manager and first shift supervisor said to run it.
The first shift supervisor, was kind enough to bring over the shop blower and remove the panels because it was hot.
I was told we...
Should we continue to run?
The rear Spindle Bearing peace is rated at 4200rpm.
Our current program runs it to 4100rpm.
We removed the service panels, turned off the heat and opened the doors. ...
What is the maximum temperature for the spindle bearing before the machine stops? Will the machine stop itself?
We’ve had some alarming noise from the machine and haven’t been able to determine...
Does anyone know of a manufacturer that sells a collet clamp similar in quality to the extinct Hardinge G15 collet clamp for C5?
Hello
I run a Daewoo 240L and a Doosan 2000SY.
My co-worker who runs a HAAS VF-3, and I’ve nicknamed 40 Watt, doesn’t understand social distancing guidelines as they’ve been suggested by local...
All positions have been filled 03/26/20
G54 is where it starts.
I look exactly like the guy in the photo, only taller.
Yes and No.
Nothing has changed for us. Business as usual. (We make medical products). However the guitar factory next door: PRS, is shutdown.
They don’t have the space to distance one...
The 3100 is a beautiful machine. Treat it respectfully.
I’ve no experience in practice of what you are doing.
I understand it, yet I have been told “low tech” is high tech, for some processes. ...
I see with my ears.
I keep a tool log, with notes of why it needed turning or changed.
Also a note of how many parts it cut to forecast the next change.
*Keep a offset log. This will tell you...
The heat issue still exists.
It’s being generated by the repeated acceleration and braking during part production.
*Running the spindle at 3500rpm continuously for 8 minutes the temperature went...
Today was the first day I had a chance to run this machine again.
It was “checked out” but not actually run for more than a hour.
The Q-Setter seems to work by the setup guys who checked it out. ...
Attached is a screenshot of the post I referenced from 11/06/19 regarding proximity sensor within the Q-setter arm “elbow”.
I am pretty sure this is a bad idea.
Imma say... don’t do it.
I had a TS, (SCI) clearance for the 12yrs I was in the Navy.
But it’s been 20 years.
I’m NOT a program guy.
Repair, maintenance and operator only please.
Nope.
Two issues A: Q-Setter arm proximity sensor. There’s a post in here from November 2019, that describes a repair we did after a 2028 alarm and seeing the “OFST” flashing. It seems the same...
Friday was the first time the Daewoo Puma 240L
presented “any” alarm or indication. It first stopped in mid program on February 27th.
There’s nothing in the alarm history after the 27th.
The...
Alarm 2028
Alarm 2028. My bad... just realized the error.
“Spindle Rotation Condition is not ready. Check Spindle Rotation Condition”.
(I actually saw the 2020 alarm today on a different machine Doosan...
Attached
It seems it will not allow attachments at the moment
I just took this photo. Daewoo alarm history
The alarm we got today isn’t shown in the alarm history.
February 27th at about 7:30pm is when it first stopped but no alarm.
This alarm history...
What is the English description of the 2020 alarm?
Is it the same as the attached file? " Coolant and Lub. Pump Overload"[/QUOTE]
The description you gave is nearly verbatim for a Doosan.
The...
We’ve got bigger issues showing now.
Alarm 2020
And... within the attached photo...
The SMAX value changed on its own from 3500 to the 32767 you see in the photo.
The position is currently within 2nd Shift.
5pm to 10pm Monday to Friday.
Starting wage is $16 per hour.
Stevensville Maryland.
Contact 2nd Shift Supervisor : [email protected].
Setup...
Question:
This is to resolve a Q-Setter issue.
What does the following process actually do?
1. Turn off computer, E-stop, shut off master switch and wait 1 minute.
2. Turn on master pwr...
Just received word Ellison Technologies will be here Monday.
I’ll review the content of information you’ve provided within the next 24 to 48 hours.
Will update here as progress is made. ...