How do you change clamping from OD to ID on a Mitsubishi Meldas 64 control, it’s on a Daewoo Lynx 210 btw
Type: Posts; User: Kalmachine
How do you change clamping from OD to ID on a Mitsubishi Meldas 64 control, it’s on a Daewoo Lynx 210 btw
So I just dug into this a little deeper, the programming book shows the parameter information above, but the parameter book with my machines serial number on it says 6407 bit 6 is a high/low coolant...
Just starting to run my first Daewoo lathe, I have always run Haas. My machine has a Mitsubishi Meldas 64 control. I mounted a dead length 5c collet chuck on it and can't seem to get it to switch...
I get "alarm 210 cannot command m198/m99" when I try that using card, thanks
I have a 2002 Makino with Pro3 control, running very large programs of cf card currently. I assume there is no way to start a program at a tool in the middle of a program, other than an M198 callout...
I attached a picture of my board that I believe is the buffer,
A16B-2200-0913 is number that was on it, I also attached a picture of one for sale... Fanuc told me to try the standard buffer board I...
Does the Fanuc high speed buffer work well for running high speed machining code?
I talked to Fanuc today and it turns out my machine has a remote buffer option board mounted beside the RISC board with 2 Honda ports one for rs232 and one for rs422. Said my machine has the time...
What is 4K?
I did reach out to Fanuc by email, we will see what they say. I did some more digging on my machine to try to identify my control better and I pulled my main cpu board and it had board number...
Is it possible to retrofit a data server to a 16B(I think) control? I have a mid 90s MV40 with 20,000rpm spindle, 64 bit RISC HPCC board, and only 512k of memory. The high speed machining book that...
I have a 93 mori mv40 with 20,000 rpm cat40 spindle with high and low range, that has been sitting for a bout 2 years, it made a small move from my old shop to new about a year ago, probably only a...