Search:

hi can you make some pictures of the parameters plea
https://youtu.be/jh3tHxVOiBY

Hi can any one help me with the parameter list for m2 20/40-50B . I have replace the battery and the machine is working bad


https://youtu.be/jh3tHxVOiBY

here same problem can you help me , did you so
https://youtu.be/jh3tHxVOiBY

hi guys im also missing the parameters list can you post it? I have all the manuals and i will load them for every one


https://youtu.be/jh3tHxVOiBY

Hi guys , i have a old mondo that i cant seem to understand the referance procedures. Its a 2 manual axis and 1 servo 97 , hdd drive .i post a video maybe you can see what im doing wrong...

Hi guys , i never made multi pass threding on it , i have try all types of settings it wont cut . I just say is wrong no alarm no code . i have added a video
...

hi do you have some manuals from the spindle drive?

alex

I have tested this way with a 16mb CMOS . It works with large Sram and Dram but not a larger flash drive . My originaly was 8mb and i pun 16mb . It was foramting the memory , i made a extended...

how did you fix this im olso missing the dnc meniu ?
tnx

In the instal meniu , We have instal FR-instal MD install And maintance . Inside maintance There îs extedned instal And initializing Memory disk. First you do md then extended instal

I have done the initialize memory disk, i getting this 955


0955 Spec. code: data file
[Code] ABCCCCCC
A:
1-> NC specification code file (FR0A:)
2-> EC specification code file (FR0A:)
3->...

the FR instal Meniu gives a 152 alarm


152 Memory disk ROM write
An error occurred in data writing onto the memory disk (FR).
[Character-string]
Start of writingThe transition from read-only...

guys i have a problem on the instal part . I have change the ucmb and now it gives a 955 error has anyone had this problem ?



0955 Spec. code: data file
[Code] ABCCCCCC
A:
1-> NC...

Hello guys , i have reload my parameters after a battery problem and now the machine is up an running but it i try to start spindle M3s1000 it gives this e102 . My machine dont have a tool changer ....

Î have instaled from extended instal 1/6 to 6/6 And reload system beckup Disk . Olso If i want to do a FR instal it gives a error. Înhame notice my dram sdram And flash from new ucmb îs larger in MB...

Hello guys i have change the ucmb reload the parameters And Im getting this alarm p 955 . Machine serial number . It must be chamge Somehow?

Allex

Make a cable , get the software from last post send it that msdos software And Upload parameters

hello how did you solve the problem i have a similar error on a u100m olso a 252 ram error

hi how dod you solve this 128 alarm? same problem here if I put switch in instal mode it says no floppy as the machine don't have installed

hello did you solve the parameter loading on FNC I have a similar problem

hi guys this is the backup of a arrow 500 with CT control anyone know how to load them up to machine?

it dont move any axis. Its anormal to have only Y axis in position meniu . Inside of the cabinet there are 4 drive . If there was a drive fault it mst have a alarm on diagnostics but it says NO alarm...

Hi guy i recently got a used hass vce from 94 and my position meniu it showing only Y axis and olso it says safety delay When i try to referance the machine. Any one hâd this problem?
...

hello did you solve the file transfer
?

Its a China controller , i have conected the linear scales to it . i have tried to get the P more the 38 max and it starts to oscilate . In the controler i have 3 things G0 to 3000mm/m which is the...

https://www.youtube.com/watch?v=c5HPBLHmtd4&feature=youtu.be




Still cant get it right . Problem is i cant see the scope right in working mode . I use a liniar scale on it . I need some ideea

No i have found the problem . It has Puls Dir command on the controller and the step liniar has Step Direction . I got it moveing in today , problem is is moving in one direction . When i...

Hello ,i have a machine that im retrofiting whit step2linar . Im have the SW connected to drive , i see the encoder , when i enable it drifts as on + slow . Like motor offset or balance . I have...

it works perfect on 4800 and 2400 . Problem is its not good for hss because of the buffer . Check cable

MITSUBISHI ALARM LIST



ALARMS

If you have a Y03 Alarm, there will be an axis number displayed to the right of the alarm. This alarm means that the NC believes that axis is not connected to...