Search:

I want to make a part in 3 different sizes. Is there a way to scale up to make a larger part for the smaller one?

Our Deawoo with 18M control had a 915 sram parity error. Pushed RESET & DELETE and powered on. I just don’t know the procedure to load back everything. Can you help? Bill

It's a 24 volt halogen 2 prong I just do not the watt

Sounds like a great idea do you have a part number?

DMV500 AV5S0470

Can anyone give me a part number for work light bulb for 1999 daewoo cnc mill

Thanks to all that replied argument settled.

Question. When single pointing a pipe thread is the threading tool 90 deg. to the thread or to the center line of the part?

lol. Yes all the steps to remove chuck were followed. I understand you asking but been doing this for 35 years.

Takisawa CNC lathe with a 15T control is having some problems. The chuck is leaking hydraulic fluid at a pretty good pace. We cannot get the chuck off of the draw tube. We have used a six foot...

It was the switch on the X.

Yes 18M

I did that still the same.

I can zero out Y and Z . On X when the plus(+) button is pushed on the screen comes (No,2112 MANUAL AXIS MOVING INTERLOCK). Can you help with this?

Good morning. I loaded the Parameters, PMC and the DNG. I can zero out Y and Z . X when the plus button is pushed on the screen comes (No,2112 MANUAL AXIS MOVING INTERLOCK). Can you help with this?

Yes I have the parameters ready to down load.

cleared the memory now need to down loading parameters for 18M control. Anyone know the steps?

Have you ever taken one off before?

Spindle is running at 1200 rpms coolant is up to the top of spindle. Is there some kind of check valve that could be stuck?

we just bought a1999 daewoo 500 with through coolant. I get coolant to top of machine but does not come out.

200 LV=1 for X and Y 201HCA=1 for X and Y

FANUC 18M CONTROL. We have to turn the machine on and off a few times before this alarm will go away then the machine runs fine. X,Y 414 servo alarm Axis detect ERR