Search:

Anyone have a manual for one or even the pictures for lifting points?

Still available. Getting inserts and nano coated bits in shortly.

still available

Still available. If you need a platform not listed send me your info and what you need. Just added EOC12A COLLETS.

R8 and tg100 added in.

I love them for my stuff.

Still have plenty

new bits coming

new bits coming

Adding R8 collets in a week. And some er kits.

do a two sided machining. at some point you will need to anyway

Putting in an order for restock if anyone has a size they are interested that isn't up for sale let me know. Need to know by tomorrow.

Putting in an order for restock if anyone has a size they are interested that isn't up for sale let me know. Need to know by tomorrow.

Putting in an order for restock if anyone has a size they are interested that isn't up for sale let me know. Need to know by tomorrow.

https://www.ebay.com/itm/202962651103

Single Flute Endmills for aluminum

https://www.ebay.com/itm/203041654293

Down Spiral




https://www.ebay.com/itm/202960704024

Upcut

https://www.ebay.com/itm/202852184821 ER32

https://www.ebay.com/itm/193298873544 ER20

https://www.ebay.com/itm/193626633381 ER16

https://www.ebay.com/itm/203052167187 ER25
...

https://www.ebay.com/itm/202852184821

I'm placing an order for some bits and collets. Anyone want to jump in and get s discount from my ebay pricing please hit me up.

Check out the kinda of...

also available, I have cuttoffs of .090 5052 aluminum ranging 3" wide to 6". Sold $1 dollar a pound.

Abs from thin to 4 inch thick
Hdpe 1/2" to 1 1/2" thick
Ldpe ask
Umhw ask

Save money by not having to buy a full sheet. Just shipped 75lbs to Ohio for $65.

[email protected]

Anyone have a good hook up for roller hold down rubber sleeves. They aren't cheap.

Thanks in advance

Can anyone chime in on difference between the two. I have keling 1100w servo motors now. If I went with 1000w ac delta servo motor is that a big upgrade or do I need to get the 1.5kw or 2kw if i want...

https://www.ebay.com/itm/10pc-MINI-Push-In-Straight-Fittings-1-4OD-M6-Thread-MettleAir-MTC1-4-M6C/260445696877?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649

get push to fit fittings. run a hose to it and send it to a block that you can put all the zerk fittings on in one location. Ebay has them.

Thanks Mactec I'll check those I know it is a c32 board with ethernet smoothstepper with an smv vfd. I'll look up the model.

Any suggestions from someone that has already applied this?

Just had a brown out and mach 3 didn't get affected but the spindle did, almost broke my bit. I figure I would run a wire from the vfd...

thanks for the posts, found the devil.

Ger as always great advice. I found for large parts a tape and the camera feature on mach with crosshair works great for calibration. But yes, i concur with...

Just checked holes are within .010". So I have a feeling it may be my steps are just slightly off. Anyone have some tips for calibrating over longer disrance than a caliper can reach.

Just did a program that had alot of holes in the beginning and in the beginning if the cutout profile I had to stop the machine and rehome. I got coordinates of two opposing holes on furthest...

What I did for my switches was buy an adjustable charger adapter. You just need to hook ground back to board ground. Then you can adjust the voltage for your sensor to work properly. I think mine...