Hi,
We have cc 300 cnc with pc 600 plc. recently we change ZE603 card battery after give low battery alarm, after change battery control panerl keys not works and give error 2670 SPS time...
Type: Posts; User: jalil
Hi,
We have cc 300 cnc with pc 600 plc. recently we change ZE603 card battery after give low battery alarm, after change battery control panerl keys not works and give error 2670 SPS time...
Hi
recently after 1 hour switch on of machine, during working machine all axis stop moving, As waiting for the command , at this time in manual mode also we cant not move axis ,in this situation...
HI,Can anyone help me? recently maho mh2000 during working halted (spindle work but all axes halt) that some time after 1~30 minute start to working, otherwise musty reset machine. and in halt time...
Hi everybody,
We have a old MAHO 1000 with 432 control, that recently in reference mode X axes moving reverse (-X side).
any help or info on this subject would be great.
best regards,
...
Hi everybody,
We have a old MAHO 1000 with 432 control, that recently starting making a high pitch noise coming from the Z-axis servo motor and later turned into a vibration of the Z-axis ball...
Dear Sir:
Hi,recently we've reached to a problem in edm machine model: SW5000B & EW400F3,and unfortunately we've not electrical drawing if any gentleman have a this schematic please send this...
Hi,
I need SolidCam postprocessor for Heidenhain - TNC355
Please help
thanks a lot
JALIL
hi
we solve the problem. we change the transformer (3x19v AC)
regards,
NAYEBI
Hi
Is there anybody who knows reason for OPEN LOOP (show in monitors) for MAHO1000 with Phillips 432 control. we can't move the all axes & etc.., Are there any experience with this faults?
Reply...
Dear GRUSSE:
yes we check constant & check all of board except drives and software is 432
yes we check constant & check all of board except drives and software is 432
dear GRUSSE:
we can't move all axes and for all axes give error X,Y,Z 04 also we cleaned all linearscale but problem not solves.
best regards,
JALIL
Hi
Is there anybody who knows reason for DIFFERENTIAL COUNTER OVERFLOW error for MAHO1000 with Phillips 432 control. when we want move the axes,machine give error X04(Differential counter overflow)...
HI,Can anyone advice me? I have a problem in machine constant MH2000,after changing battery of system, now constant key in cabinet not worked & we can't edit constant value, machine give an erorr M01...
Dear Mr. Sinha,
you can used CIMCO or DNC4U Software for send & receive G code from PC To CNC machine.
25pin(CNC) 9pin(PC)
2 *--------------* 3
3 *--------------* 2
4...
We are getting in a new lathe and it will be the first time I have ever used a true fanuc conroller it is a oi Mate-TC controller.
now i can't making inch thread, because i don't inch thread G...
Hi,every boy
I am looking for any information regarding an Indramat MOD 1/1X375-210, Contr: TDM 1.2-100-300-W1/s105,and I need if you have the drawings or any material to help me.
now machine...
Hi,every boy
I am looking for any information regarding an Indramat MOD 1/1X375-210, Contr: TDM 1.2-100-300-W1/s105,and I need if you have the drawings or any material to help me.
now machine...
hi, please advice me, about pin arrangement of communication cable: PC 25 pin LPT to CNC 25 pin.
machine model: FANUC cnc mill Oi series
best regards,
NAYEBI
hello everybody!
I need some help this machine.
maybe this is not a machine problem, maybe it is a control problem.
i got this error:
"UNDERLAUBTER WZW-ABBRUCH M06"
"INHIBIT.INTERR.TOOL...
HI,Can anyone advice me? I have a problem in transfer Gcode file to CNC432 F700(maho MH2000),machine after receiving 10 or 12 line Gcode give an error D40(baut rate error) but for receiving form cnc...
HI,Can anyone help me? we can't transfer Gcode file to CNC432 (MAHO 2000) because machine give an error D41(read in/read out device not ready) please advice me.
also hlpe me about amount baud...
Hi,
can anyone help with dwonload/upload Gcode form PCMCIA to machine of Fanuc Oi-MC?
Thanks,
Jalil
Hi,
can anyone help with changing the language of the control panel of Fanuc Oi-TC from chinese to english?
Thanks,
Jalil
Hi,
can anyone help with changing the language of the control panel of Fanuc Oi-TC from chinese to english?
Thanks,
Jalil