Where the hell is Nate , have sent emails from his site , NO REPLY . I am interested in the new rack upgrade 3/4" x 60" , any one have info , any help would be greatly appreciated !!
Thank...
Type: Posts; User: edcross
Where the hell is Nate , have sent emails from his site , NO REPLY . I am interested in the new rack upgrade 3/4" x 60" , any one have info , any help would be greatly appreciated !!
Thank...
I need a m6 macro for a tool change , have contacted Mach support , Trevor said they could not help me ? . I am running Mach4 v 4809 64 bit -- Smoothstepper ESS -- Gecko 540 controller . Does anyone...
G53 A 9000 , will make my A axis turn continuously until it completes 9000 degrees at the motor velocity in the motor setup . How can i put this line in my gcode and have it stay active until...
There in lies the problem ! How to set that up in Mach4 ??
Ed
Is there someone who can create this gcode , or macro / script for Mach 4??.
Ed
Looking for a gcode file to make the 4th axis turn constantly in mach4 , until a stop command is given . Ideally it would be a macro / script , that can be activated by a button on the Mach4 screen...
Mach 4 latest version , add custom button to turn on/off A axis, script / macro to run constantly , like the spindle button does .
Thanks
Ed
Vetric support said , will not migrate from a different version ( desktop to desktop Pro )
How to migrate files from desktop 10.5 to desktop pro 10.5 ( tools - settings - files etc )
Hey guys , i am looking for the new zero touch plat script for mach4 v4300 , watched the mach4 video but script was not listed and cannot copy from video or screen shot . If someone could post it ,...
Is anyone running the new Modulerworks simulator in mach 4 v4300
Got it , Thank you Ed
File will not unzip or open
Hi Guys , attached is a drawing of what i want to cut a pocket for . This is for a backgammon board inlay , the pocket needs to have a pointed cut on the end . When i draw it the end cuts round , can...
Thank you.
Ed
Hi Al , I now have V 29 . I want to cut a bowl 12" dia x 4" high with radius sides , I want to draw and cut inside and outside . Can you point me in the right direction , are there any videos etc....
When i run a laser program with multiple parts in it , the first part cuts at the feed rate I entered in v29 . When it goes to the next part , it doubles the feed rate speed - maybe more, when i look...
Does anyone know what the laser power settings code is , and where do they post are they M code.
Does anyone have the Mach 4 setup to turn on / off pin#5 on the Gecko g 540 controller with pmdx 411 smartbob ??
Thanks
Ed
Thanks Engine Guy , I'll give it a try .
Ed
I am looking to add on a laser to my cnc router . I see that many people use the spindle feed to turn on / off laser , but how do I turn it off during rapid moves between tool paths , so it does not...
I have a Full Spectrum Hobby 5th gen laser ( 20" x 12" ). Main board has failed , FSL said there is no replacement available . So , I have this machine with components that still work if anyone is...
Have Mach 4 latest build Lathe , I need to change Z axis to X axis , because my Bobcad v 29 lathe does not write the gcode to the correct axis , for my machine . I have talked to Bobcad for a week ,...
I see in the tool library all the tool # are the same
I see in my tool library , the tool # are all the same
The cnc editor works now , during simulation I get a unexpected error , then shuts down
It says file does not exist
Sean , the simulation screen comes up with all the tool bars , on the screen and I have to remove the ons I don't want . It never did that before , also when working with a profile , it will not...
I Am going to probably going to upgrade to V29 Mill , does anyone have a speeds / feeds file for Wood .
Thanks
Ed
Have v25 , latest update , has been working fine, now I am having trouble with simulation - cnc edit . Win 8.1 , I noticed that the system folder is missing from the tree , tried to repair through...