Search:

https://scontent.ffcm1-2.fna.fbcdn.net/v/t1.0-9/89964259_10157134680725003_1142737926694633472_n.jpg?_nc_cat=108&_nc_sid=07e735&_nc_oc=AQkKaHi0BkOWnJIfhwQK47hZYHI6JnYVFrJXj6sF1uO11mTsC4EN3kuAzTTJwE3MI...

If anyone is interested, I modified the post to add M102 P1 and M102 P0 to turn my mist on and off.

Thanks rdsi, your information has been very beneficial!

Everything is finished and I 3D printed this mounting plate for the valves and manifold. Only thing I have left is finishing up...

Got it! I figured out my issue, W3 needs to be in the "UP" position to supply +5vdc over 18-26.

Thanks for all the information. I have mine up and running now.
...

I am a bit confused. You have a 5v power supply for the relays but it looks as if you are powering the relay board from the MESA using pin 18 for +5 and pins 10 and 12 for GND

Good to know, they aren't too far out from me. I'm in St. Paul,MN

I'd be interested if you sell!

Yes..

But it is a abrasive nylon cup brush for deburring.

Did that, finding that cast would be a better material though.

https://www.cnczone.com/forums/attachment.php?attachmentid=396602&stc=1

I figured I would see if anyone has one they aren't using before I order one. I had all intentions to order one from Tormach, and probably still will, but they bumped the price up $100 on it.

I have a 1100 in St. Paul

Location?

-Edit--- Sorry, just noticed it in the title.

Maybe some others with first hand experience will chime in. In my experience bearing noise is bearing noise. I had the wash tub bearings go out on my washing machine and it sounded just like a car or...

John Grismo did a video on it, link below. I would say you would know by the sound coming from it. An automotive stethoscope could help you pinpoint the noise.
...

=) I kind of wish I bought this...

I would like to know more about the enclosure mods you had done. I really like it!

Fusion 360. We'll see how well the 4th axis features can serve me...

All wired up and mounted (somewhat). I did find it kind of annoying that the wires from the bulkhead connector didn't have wire...

It arrived yesterday, YAY

https://scontent-ort2-1.xx.fbcdn.net/v/t34.0-12/27157301_10155301899235003_1412886882_n.png?oh=8de6b700147d5041c617aeaf46eb458a&oe=5A6D016C

There is nothing terribly complicated about making one of these. I don't see the point in seeing that is on the board unless you just couldn't wrap your brain around how to recreate a circuit.

I purchased a 8" super spacer. Thanks for the offers that were shown here.

I'll keep that in mind. I ran some numbers and it isn't worth me to make a trip to Chicago area just for this. If someone comes up where I'd be closer that way I'll let you know.

I hardly ever get over there for no specific reason. Is it the super spacer or the normal left side mount? I assume it is motorized with the 4th axis kit. Anything else with it, like chuck? Let me...

Sounds good! Good luck with the sale, looks super clean, looks like someone will get a great product.

I think I would be interested in these things too...


Tool Tightening Fixture
2- Mag bases w/ indicators
Edge Pro Tram with TTS Holder

Before I bite the bullet to buy a rotary table / 4th axis setup from Tormach I thought I would see if anyone here is looking to unload one. I am located in St. Paul, MN but willing to pay shipping if...

I'd be interested if you are willing to separate stuff. Specifically the haimer, any TTS holders (ER or Set Screw), and most importantly, if you are willing to part with the ATC stuff, I would be...

Maybe next week or the week after I could meet up with you. I received my machine last week and just got it moved into place, leveled and adjusted.
...

If you have any info you'd like to share on this, I would be happy to receive.

If you haven't got in contact with him, I do have his information.

Just to update and close the loop. I purchased a machine.

As in a meet and greet introduction to the machine? =)