Hello.
Yes, I was easily able to resolve this issue.
In my case, the answer lay in adjusting the stop sensors, ever so slightly.
I adjusted the sensors, very slightly, closer to the trucks...
Type: Posts; User: Redcedar
Hello.
Yes, I was easily able to resolve this issue.
In my case, the answer lay in adjusting the stop sensors, ever so slightly.
I adjusted the sensors, very slightly, closer to the trucks...
Thank you.
Yes I have set the Z zero for the surface of the material.
I am unclear how the touch plate can accurately reflect the surface of the material when it is positioned above the material....
Hi guys. I am very new to all this, so please bear with me here. :-)
I am running CNC Router Parts/AVID CNC's version of Mach 4.
I also have their Auto Z and Corner Finding Touch Plate:...
Yes I did.
It turns out that the limit switch on the Y- Slaved Axis had to be adjusted (outwards if I remember) ever so slightly.
I loosened the nut and moved the limit switch toward the...
Hi Guys.
I need to get a new grease fitting for the right z-axis truck.
They are chrome colored and have a right angle bend.
The same fittings are used throughout the machine.
Are they M4 or...
Hi guys.
After epic work, I am very close to having my Mach 4 contolled router working correctly.
I am setting up my new 4x4 router, which is built with all CNCRP parts and their Plug and Play...
Hi folks.
I have a Fineline Automation Saturn 4x4 machine that uses all CNC Router Parts components. The machine itself seems fine, so let's not start an anti Fineline Automation thread. :-)
I...
Ok, thank you, David.
Having the picture helps.
I bought some parts today and will fabricate a spacer.
I'll let you know how it goes.
All the best!
David
OK, thank you for that information.
Did you need to put a spacer in to raise the height of the NEMA motor to connect properly to the Z-Axis coupler?
If so, did you get the spacer from Fineline or...
Hi Guys.
Sorry, I was unclear on the terminology.
Yes, it is the Z-Axis motor that mounts at the top and powers the ball screw that lifts the spindle up and down from the work surface.
I think I...
Hi Folks.
I am putting together my Saturn I 4x4 machine. It came to
me in December of 2016, but I was delayed in completing it due
to family commitments.
I could use your help on how to...
Hi Folks.
I am putting together my Saturn I 4x4 machine. It came to
me in December of 2016, but I was delayed in completing it due
to family commitments.
I could use your help on how to...
Thank you, David.
That's an excellent video.
I got the two Y-Axis spacers installed yesterday
and will do the X-Axis today.
Please keep posting videos! They are very
helpful to me as I am...
Thank you, Nate!
I appreciate the quick response and the clarification.
You are correct, I had forgotten about the rack on the X-Axis.
Now I can back to work on my machine! Thank you again.
...
Hi Guys.
I have a Saturn I 4x4 machine and am installing the black rack spacers
that Nate kindly sent me. Nate sent me 6 spacer bars and a bag of longer
machine screws to install them.
Do...
Hi Nate.
I purchased a 4x4 Saturn last year.
I would be interested in the upgrades and have sent you a PM.
Thank you!
David
Hi Guys.
I am new to CNC and have a new Saturn 4x4.
I would like to use 3/4 inch MDF for the spoilboard.
The work surface of the machine is 60.5 inches wide.
The MDF sheets are 4x8 feet.
...
Has anyone purchased from Build Your CNC?
I am looking at this Spindle and VFD combo and would appreciate your thoughts.
It would be used for wood, plastic and non-ferrous metals.
...
This is very helpful.
Please keep posting photos and comments!
Thank you
Things have been pretty quiet around here lately.
There is no action on the new In Motion web site.
How are the high end machines coming. Are the extrusions working out?
Thank you.
OK, thank you. I will keep watching.
I appreciate the updates.
Cheers!
RC
George,
How are the new Predator and Demon machines coming along?
Also, would it be possible to update the website? It would be really helpful
to get a clear idea of what is available, the...
George, how do you secure the Demon (in the lower photo) to the table top?
Are there pockets to put screws or bolts through to attach it to the table top?
Thank you
Thank you George for the updates!
Most appreciated.
I am standing by.
I check daily for news.
However, I know these things take time to get right.
Regular updates of the website would be appreciated.
Thank you George for all your work on these machines.
Better yet, just post all the details here where we can all see
and place an order. Thanks.
Hi George.
Sorry, I did mean Turnkey.
However, the kits are great--I assume there are assembly instructions available as
these new machines are a different design from you previous machines.
...
George,
From your comments it sounds like you are planning to sell completed machines. Is this correct?
If so do you plan to offer a 4x4 machine, say 50" x 50"?
Thank you for your time.
When will the completed kits be for sale?
Will you offer the option of colored pieces?
Costs?