Depending on the hp of the motor, you need to use a vfd that fits the hp. I use a GPD 315 for my 7hp perske. The problem when you use 240v converted to 3phase, you loose hp. If your spindle is rated...
Type: Posts; User: Easydad
Depending on the hp of the motor, you need to use a vfd that fits the hp. I use a GPD 315 for my 7hp perske. The problem when you use 240v converted to 3phase, you loose hp. If your spindle is rated...
I don't know about a program, but you could try putting notches in the cutting tool with a file, just be sure to notch both flutes at the same level. Use old bits that cut roughly now.
Using the Vetric cut3D model slicing feature to obtain a 3D part of say: 4" in height with only 1.25" material; I get 4 files to convert to g-code. The problem is that each file contains a -z axis...
I'm looking for the same thing
I've been looking for .5" round ball end router bits. Amana is the only mfg. listed in the searches I've tried. I also looked for 12mm ball end router bits. The project I have to complete needs a...
I second the software driving the para-port output. Due to your reluctance to list your configuration and the fact you keep repeating the same thing and asking for help; I don't know of anything else...
It sounds like you don't have an interface board on the paraport to drives (gecko?). Look at cnc4pc.com their c-10 interface board. The gecko's have isolation inputs, so set-up with Arturo's boards...
are you running in axis?
To All,
I just joined cnczone this morning, I was told that this is the largest site for assistance on everything CNC. I would like to purchase an old software package from someone who has...