Thanks Brad
Yes MA
Type: Posts; User: Karlwinter
Thanks Brad
Yes MA
Some more pics and price 12k?
Full enclosure and running perfectly. Everything to run except No tooling or vise.
This machine is a week end worrier and has been great.
Coming accross hard times like so many have forced me to...
I hope you plugged back in the original driver to make sure it wasn't terminal fretting or pin fitment. Glad to hear you got in worked out. You have to check on them poeple from NH time to time:)
3.7000" for the PDB legs
Is this what you need
Can you explain this procedure? I'm having same issue tramming
I used bubble with way covers off with bubble on y axis ways and its perfect. I have .0065 with turning spindle pointing Y+ with Y- at...
Looking at a wire diagram from older models I dont see it has the thermal reset switch. This is out of the 1100m
Hi
No it is not on VFD. BEcarfull poking in there.
Your picture is different than what my machine looks like.
It's on the column on the inside of the enclosure
I'll see if I can get pictures...
If this machine has a thermal breaking resistor I strongly recommend looking there for your spindle concern. . There is a little push button to reset it. Look in at the enclosure on the z axis up...
Yes indeed on the weather!! Mid 60s ain't to shabby this time of year ay.
Good luck Kyle.
If you don't get it resolved I just opened a thread for the Brix controller I got with my 1100m in the classifieds. Im not using it and it has never has been used. Good luck man
This is brand new never used. Im using another controller for my 1100m. I have all usb that came with it.
I want to sell but trades welcome too. Let me know what you have. Not sure what to price it...
Petty sure they 3d printed them FB cover's
Is this a 1100m? If so check resistor temp while spindle is running.
Still chasing same type of problem.(5months). Is this a M 1100?. I Pulled the spindle. It actually took less time than finagling in machine.
It did not help. Ihave found that the machine will cut...